ca. 1900. This is a copy of an early photograph of the Atlas Foundry & Machine Co., originally taken circa 1900. The copy was made in 1978. Atlas Foundry (since renamed Atlas Castings & Technology) was established in 1899 as a manufacturer of iron castings. Steel and brass were later added to its catalog of moldable metals. Its sprawling complex is still located between Center St. and South Tacoma Way.

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1900-1910;

Groundbreaking for Atlas Foundry's $5,000,000 expansion and modernization project occurred on February 23, 1978. Standing with his foot on a shovel is company president Leo H. Long, Sr. Among those attending the ceremony were Milo S. Gates and Chuck Fausel (flanking Mr. Long). Founded in 1899, the company is now known as Atlas Castings & Technology. Photograph ordered by Atlas Foundry. (TNT 2-24-78, C-12-article on expansion)

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1970-1980; Steel industry--Tacoma--1970-1980; Ground breaking ceremonies--Tacoma--1970-1980; Shovels;

Groundbreaking at Atlas Foundry. Ground was broken on February 23, 1978, at the Atlas Foundry site for expansion and modernization of the longtime Tacoma company. Several new buildings and renovation of equipment, totaling $5,000,000, were included in the five-year plan. The company employed approximately 400 people. Pictured above is company president Leo H. Long, Sr., who is flanked by Milo S. Gates, president of Swineston & Walberg Co. and Charles "Chuck" Fausel, executive vice-president of Lester B. Knight & Associates, Inc. All three are gripping a shiny shovel with a small plaque attached. Photograph ordered by Atlas Foundry. (TNT 2-24-78, C-12-article on expansion)

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1970-1980; Steel industry--Tacoma--1970-1980; Ground breaking ceremonies--Tacoma--1970-1980; Shovels; Long, Leo H.; Gates, Milo S.; Fausel, Charles;

Atlas Foundry. A Bicentennial flag flaps in the wind in the Atlas Foundry's visitor parking area in the spring of 1976. Parked beside a plant building is a bright orange truck filled with a variety of steel castings manufactured by Atlas. In 2002 Atlas Foundry became Atlas Castings & Technology, further expanding the size and materials offered and increasing their presence in many primary markets. Color photograph ordered by Atlas Foundry & Machine Co.

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1970-1980; Steel industry--Tacoma--1970-1980; Trucks--Tacoma--1970-1980; Merchandise displays--Tacoma--1970-1980; Flags--United States;

1976 Daily operations at foundry. An unidentified female technician at Atlas Foundry & Machine Co., 3012 Wilkeson St., conducts quality control tests using a Tinius Olsen machine in the company's tech center. The Tinius Olsen machine would be measuring the foundry products' strength and performance. Atlas Foundry has been a presence in Tacoma since 1899 when it began manufacturing iron castings for the local logging industry. It then branched out to steel castings and further steel production. The foundry's name was changed in 2002 to Atlas Castings & Technology. Photograph ordered by Atlas Foundry & Machine Co. (www.atlascastings.com)

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1970-1980; Steel industry--Tacoma--1970-1980; Product inspections--Tacoma--1970-1980; Testing--Tacoma--1970-1980;

Daily operations at Atlas Foundry. An unidentified employee at Atlas Foundry & Machine Co. is seated at a workbench apparently testing a Cycon circuit board. This may have been in the foundry's tech center. Photograph ordered by Atlas Foundry & Machine Co.

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1970-1980; Steel industry--Tacoma--1970-1980; Product inspections--Tacoma--1970-1980; Testing--Tacoma--1970-1980;

Atlas Foundry furnace. Three men working near the furnace in this photograph from January of 1937. They are guiding a bucket of molten iron or steel suspended on a large pulley above an open grate in the floor.

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1930-1940; Steel industry--Tacoma--1930-1940;

Atlas Foundry furnace. Workman igniting the foundry's new furnace. Glimpse of the foundry interior as it was photographed in January of 1937.

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1930-1940; Steel industry--Tacoma--1930-1940;

Atlas Foundry furnace as photographed in January of 1937. Workmen inside foundry. Laborer pouring glowing molten iron or steel into barrel. The process appears to be the method and machinery used prior to the foundry's installation of a new furnace.

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1930-1940; Steel industry--Tacoma--1930-1940;

In January of 1937, a team of workmen at the Atlas Foundry, 3012 So. Wilkeson St. were photographed pouring molten metal into a small mold. In 1937 the Atlas Foundry employed 97 skilled workmen, and was the largest foundry on the Pacific Coast. Their three story pattern building housed over 50,000 wooden patterns, from which they could make castings varying in size from a 2-ounce bronze boat fitting to a 16-ton cast iron slag pot. Founded in 1899, the Atlas Foundry is now Atlas Casting & Technology. (TDL 3/28/1937)

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1930-1940; Steel industry--Tacoma--1930-1940;

Atlas Foundry furnace. Six workmen observing glowing furnace and an open grate in the floor in January of 1937. Two of the men are twisting a metal rod near the furnace.

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1930-1940; Steel industry--Tacoma--1930-1940;

Atlas Foundry, interior. Pouring of metal is pictured on February 12, 1941.

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1940-1950; Founding--Tacoma;

Views of Atlas Foundry and Machine Company looking south from hill above Nalley Valley. [Also dated 08-26-1941]

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1940-1950;

By July of 1941, when this photograph was taken, the sprawling Atlas Foundry had already been located at South 30th and Wilkeson Streets for almost 40 years. Their complex of buildings was located between Center Street (the road showing at the bottom) and South Tacoma Way in the Center Street Industrial District at the east end of "Nalley's Valley". The Atlas Foundry was built right next to the Northern Pacific Rail Road tracks which ran past their north side. The dirt road going up the hill at left-center is Wilkeson Street. [Also dated 08-26-1941]

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1940-1950;

Views of Atlas Foundry and Machine Company. The foundry was established in 1899.

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1940-1950; Aerial photographs;

Aerial view of Atlas Foundry and Machine Company looking west along railroad tracks and northwest along Center Street. Nalley Valley. [Also dated 08-26-1941]

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1940-1950; Aerial photographs;

This aerial view of the Atlas Foundry and Machine Company (now Atlas Casting and Technology) at 3012 So. Wilkeson St. dates from July 1941. The Atlas building, near the center, is located between Center Street (at the left) and So. Tacoma Way. I-5 has yet to be built on the ridge of open land at the far right. [Also dated 08-26-1941]

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1940-1950; Aerial photographs;

This aerial view of the large Atlas Foundry & Machine Co. plant in Nalley Valley and the area south of Center Street was taken in July of 1941. Atlas' address was listed as 3012 South Wilkeson Street which is the street running vertically on the left. The plant lay between South Tacoma Way (top) and Center St. (at photograph's bottom) The Lincoln Heights housing development would be carved out of the mostly wooded area south of the plant. At the top of the photograph is the area which would become the Tacoma Mall. [Also dated 08-26-1941]

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1940-1950; Aerial photographs; Aerial views;

Atlas Foundry, crane for Broderick & Bascomb, wire rope. Atlas Foundry and Machine Company supplied castings for firms building new machines which kept the company in touch with the general building up of all industries in the area after the war. (T.Times, 8/28/1946, p.5)

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1940-1950;

Atlas Foundry & Machine Company. Cranes and lifts for Broderick & Bascomb wire rope. A crane picks up metal scrap using a large magnetized plate. Atlas Foundry worked on their shop layout to increase efficiency as they prepare for possibly unprecedented large volumes of business this year. The foundry manufactured steel, iron and brass castings. The company was established in 1899 on a ten acre site at 3012 South Wilkeson. They were capable of producing 80,000 pounds of steel per day. (T.Times, 8/28/1946, p.5)

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1940-1950; Hoisting machinery;