Truck loaded with castings at Atlas Foundry.

Trucks--Tacoma--1940-1950; Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1940-1950;

Flatbed truck with large casting on back in front of Atlas Foundry.

Trucks--Tacoma--1940-1950; Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1940-1950;

Fageol truck at Atlas Foundry. An unidentified driver sits behind the wheel of a Fageol Flyer truck on April 9, 1928 at the Atlas Foundry & Machine Co. plant, 3012 South Wilkeson St. in Tacoma. Fageol trucks were first manufactured in 1917 in Oakland, California. The models ranged from 1.5 tons to 10 tons. Fageol had recently opened a branch at 503 Puyallup Avenue to handle sales and service of their trucks. The Atlas Foundry truck shown above is believed to be a Fageol Flyer 6. It was light but built using heavy truck design. (TDL 4-17-1928, p. 5-full page ad, no photo)

Fageol trucks; Trucks--Tacoma--1920-1930; Atlas Foundry & Machine Co. (Tacoma);

Atlas Foundry, interior. Pouring of metal is pictured on February 12, 1941.

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1940-1950; Founding--Tacoma;

Views of Atlas Foundry and Machine Company looking south from hill above Nalley Valley. [Also dated 08-26-1941]

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1940-1950;

By July of 1941, when this photograph was taken, the sprawling Atlas Foundry had already been located at South 30th and Wilkeson Streets for almost 40 years. Their complex of buildings was located between Center Street (the road showing at the bottom) and South Tacoma Way in the Center Street Industrial District at the east end of "Nalley's Valley". The Atlas Foundry was built right next to the Northern Pacific Rail Road tracks which ran past their north side. The dirt road going up the hill at left-center is Wilkeson Street. [Also dated 08-26-1941]

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1940-1950;

Views of Atlas Foundry and Machine Company. The foundry was established in 1899.

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1940-1950; Aerial photographs;

This aerial view of the large Atlas Foundry & Machine Co. plant in Nalley Valley and the area south of Center Street was taken in July of 1941. Atlas' address was listed as 3012 South Wilkeson Street which is the street running vertically on the left. The plant lay between South Tacoma Way (top) and Center St. (at photograph's bottom) The Lincoln Heights housing development would be carved out of the mostly wooded area south of the plant. At the top of the photograph is the area which would become the Tacoma Mall. [Also dated 08-26-1941]

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1940-1950; Aerial photographs; Aerial views;

Aerial view of Atlas Foundry and Machine Company looking west along railroad tracks and northwest along Center Street. Nalley Valley. [Also dated 08-26-1941]

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1940-1950; Aerial photographs;

This aerial view of the Atlas Foundry and Machine Company (now Atlas Casting and Technology) at 3012 So. Wilkeson St. dates from July 1941. The Atlas building, near the center, is located between Center Street (at the left) and So. Tacoma Way. I-5 has yet to be built on the ridge of open land at the far right. [Also dated 08-26-1941]

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1940-1950; Aerial photographs;

Daily operations at Atlas Foundry. An unidentified employee at Atlas Foundry & Machine Co. is seated at a workbench apparently testing a Cycon circuit board. This may have been in the foundry's tech center. Photograph ordered by Atlas Foundry & Machine Co.

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1970-1980; Steel industry--Tacoma--1970-1980; Product inspections--Tacoma--1970-1980; Testing--Tacoma--1970-1980;

1976 Daily operations at foundry. An unidentified female technician at Atlas Foundry & Machine Co., 3012 Wilkeson St., conducts quality control tests using a Tinius Olsen machine in the company's tech center. The Tinius Olsen machine would be measuring the foundry products' strength and performance. Atlas Foundry has been a presence in Tacoma since 1899 when it began manufacturing iron castings for the local logging industry. It then branched out to steel castings and further steel production. The foundry's name was changed in 2002 to Atlas Castings & Technology. Photograph ordered by Atlas Foundry & Machine Co. (www.atlascastings.com)

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1970-1980; Steel industry--Tacoma--1970-1980; Product inspections--Tacoma--1970-1980; Testing--Tacoma--1970-1980;

ca. 1976. Aerial view of longtime Tacoma foundry, Atlas Foundry & Machine Co., taken in the spring or summer of 1976. The company was founded in 1899 and began making iron castings for the Northwest logging industry. After the foundry was purchased by the Long family 30 years later, it began making steel as well as iron. By the 1930's, half of the firm's production was steel castings. Atlas is still in business in the 21st century; it is now known as Atlas Castings & Technology. This aerial photograph of the foundry in 1976 shows the city and roadways have grown in the 77 years since Atlas was founded. Atlas is bordered by Wilkeson (the long street extending vertically on the right) and South Tacoma Way (bottom) with Center St. on top. Stanley Elementary School is at the end of Wilkeson (top of photograph). I-5 freeway is on the bottom of photograph with the exits to So. 38th St. and Hwy 16 above. At the left corner of picture is the 25th St. bridge and Sprague Ave. (www.atlascastings.com)

Aerial views; Aerial photographs; Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1970-1980; Industrial facilities--Tacoma--1970-1980; Steel industry--Tacoma--1970-1980;

ca. 1976. Atlas Foundry by air in 1976. Established in 1899, Atlas's sprawling plant in the 3000 block of South Wilkeson was bordered by South Tacoma Way as well as Wilkeson (on right). Center St. is near the top. The Sprague Ave. overpass is in upper left corner along with offramp leading to Hwy 16. The plant's original buildings are near Wilkeson St. Atlas Foundry has been known as Atlas Castings & Technology since 2002. Photograph ordered by Atlas Foundry & Machine Co.

Aerial views; Aerial photographs; Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1970-1980; Industrial facilities--Tacoma--1970-1980; Steel industry--Tacoma--1970-1980;

Atlas Foundry. A Bicentennial flag flaps in the wind in the Atlas Foundry's visitor parking area in the spring of 1976. Parked beside a plant building is a bright orange truck filled with a variety of steel castings manufactured by Atlas. In 2002 Atlas Foundry became Atlas Castings & Technology, further expanding the size and materials offered and increasing their presence in many primary markets. Color photograph ordered by Atlas Foundry & Machine Co.

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1970-1980; Steel industry--Tacoma--1970-1980; Trucks--Tacoma--1970-1980; Merchandise displays--Tacoma--1970-1980; Flags--United States;

ca. 1900. This is a copy of an early photograph of the Atlas Foundry & Machine Co., originally taken circa 1900. The copy was made in 1978. Atlas Foundry (since renamed Atlas Castings & Technology) was established in 1899 as a manufacturer of iron castings. Steel and brass were later added to its catalog of moldable metals. Its sprawling complex is still located between Center St. and South Tacoma Way.

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1900-1910;

Groundbreaking at Atlas Foundry. Ground was broken on February 23, 1978, at the Atlas Foundry site for expansion and modernization of the longtime Tacoma company. Several new buildings and renovation of equipment, totaling $5,000,000, were included in the five-year plan. The company employed approximately 400 people. Pictured above is company president Leo H. Long, Sr., who is flanked by Milo S. Gates, president of Swineston & Walberg Co. and Charles "Chuck" Fausel, executive vice-president of Lester B. Knight & Associates, Inc. All three are gripping a shiny shovel with a small plaque attached. Photograph ordered by Atlas Foundry. (TNT 2-24-78, C-12-article on expansion)

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1970-1980; Steel industry--Tacoma--1970-1980; Ground breaking ceremonies--Tacoma--1970-1980; Shovels; Long, Leo H.; Gates, Milo S.; Fausel, Charles;

Groundbreaking for Atlas Foundry's $5,000,000 expansion and modernization project occurred on February 23, 1978. Standing with his foot on a shovel is company president Leo H. Long, Sr. Among those attending the ceremony were Milo S. Gates and Chuck Fausel (flanking Mr. Long). Founded in 1899, the company is now known as Atlas Castings & Technology. Photograph ordered by Atlas Foundry. (TNT 2-24-78, C-12-article on expansion)

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1970-1980; Steel industry--Tacoma--1970-1980; Ground breaking ceremonies--Tacoma--1970-1980; Shovels;

Atlas Foundry & Machine Company. Cranes and lifts for Broderick & Bascomb wire rope. A crane picks up metal scrap using a large magnetized plate. Atlas Foundry worked on their shop layout to increase efficiency as they prepare for possibly unprecedented large volumes of business this year. The foundry manufactured steel, iron and brass castings. The company was established in 1899 on a ten acre site at 3012 South Wilkeson. They were capable of producing 80,000 pounds of steel per day. (T.Times, 8/28/1946, p.5)

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1940-1950; Hoisting machinery;

Atlas Foundry, crane for Broderick & Bascomb, wire rope. Atlas Foundry and Machine Company supplied castings for firms building new machines which kept the company in touch with the general building up of all industries in the area after the war. (T.Times, 8/28/1946, p.5)

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1940-1950;