Aerial view of new construction in 1948 at St. Regis. St. Regis had an excellent location between the Sitcum Waterway on one side and the Milwaukee Waterway on the other. Below them was Commencement Bay and beyond was more of the Tacoma tideflats. St. Regis was expanding their kraft paper operations and adding a multi-wall bag plant. Logs are seen in Milwaukee Waterway, called the Milwaukee Boom Company dump. Logs were brought in by the railroad and dropped, sorted and made into rafts here. (TNT, 10/17/1948, p.1)

Aerial photographs; St. Regis Paper Co. (Tacoma)--1940-1950; Progress photographs; Paper industry--Tacoma--1940-1950; Industrial facilities--Tacoma--1940-1950; Logs;

St. Regis Paper Company, Tacoma's pulp mill, was constructing two major additions at their industrial site. The additions being constructed are expected to cost the company an estimated $6,000,000, this is probably the largest single industrial expansion project in Tacoma in the coming year. The expansion project began shortly after World War II ended, the project is expected to be completed in 1949. Aerial view of St. Regis Paper Company, construction in progress. TPL-5706

Paper industry--Tacoma--1940-1950; Mills--Tacoma; Logs; Industrial facilities--Tacoma; Progress photographs; St. Regis Paper Co. (Tacoma)--1940-1950; Aerial photographs;

The Tacoma plant was producing both bleached and unbleached Kraft paper. This plant was able to supply its own pulp from the local mill, therefore making St. Regis-Tacoma very important in the paper industry. Interior view of Tacoma's St. Regis plant, wood chips are being processed prior to the Kraft paper production.

Paper industry--Tacoma--1940-1950; Machinery; Equipment; Industrial facilities--Tacoma; Lumber industry--Tacoma--1940-1950; St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis had more than twenty plants throughout the world, in 1949 the company's focus was on the Tacoma plant, due to the start of kraft paper production. Interior view of St. Regis plant, view of Jones Majestic machinery; photo ordered by E. D. Jones and Sons Company, machinery and equipment manufacturers based out of Pittsfield, Massachusetts.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; E.D. Jones & Sons Co. (Tacoma);

Interior view of newly expanded and modernized St. Regis paper mill; the company's new and modern machinery and equipment make high volume paper production possible. Photo ordered by General Electric Company, machinery and equipment manufacturers. General Electric had their Tacoma offices located in the Washington Building at 1019 Pacific Avenue.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

In 1950 St. Regis began expanding the pulp mill in Tacoma, this project was expected to be completed in 1951. The addition of the kraft paper producing department in Tacoma began in 1945, the plant began producing paper in January 1949. View of General Electric machinery; photo ordered by General Electric Company, machinery and equipment manufacturers.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

St. Regis Paper Company was organized in 1899, they began manufacturing paper in New York in 1901. Interior view of St. Regis paper mill in Tacoma, seven rolls of paper are lined up, one roll is being moved by an Ederer manufactured crane. Photo ordered by Ederer Engineering Company, cranes, hoist and veneer machinery manufacturers based out of Seattle, Washington.

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Hoisting machinery; Pulleys; Equipment; Machinery industry--Tacoma; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Ederer Engineering Co. (Seattle);

St. Regis began producing paper in the Tacoma plant in January 1949; view of the new high speed kraft paper machine that is designed to operate at 2,000 feet per minute and produce paper nearly fourteen feet wide. Photo ordered by Drew Engineering Company, an industrial air systems business, based out of Portland, Oregon.

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Laborers--Tacoma; Machinery; Industrial facilities--Tacoma; Drew Engineering Co. (Portland, Or.); St. Regis Paper Co. (Tacoma)--1940-1950;

In 1930 St. Regis purchased a kraft pulp mill in Tacoma, they spent many years modernizing and expanding the company's facilities. In January 1949 the Tacoma mill began making paper, the company had previously only manufactured and sold pulp and multiwall bags. View of machinery manufactured by Pusey & Jones, photo ordered by Pusey & Jones Corporation, a machinery manufacturer from Wilmington, Delaware.

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Mechanical systems--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Pusey & Jones Corp. (Tacoma);

Construction of the new building for the Combustion Engineering Company furnace at St. Regis Paper Company. Six stories high, it was built in conjunction with a copper electric precipitator, had a capacity of 225 tons, and was to be completed by the middle of April. This was part of the continuing eight-year expansion program started by St. Regis in 1945. When St. Regis took over the Union Paper Company in 1936, the mill was producing 150 tons a day. In 1952 St. Regis produced 400 tons of brown sulphate pulp per day. (TNT, 2/17/1952, p.C-14)

St. Regis Paper Co. (Tacoma)--1950-1960; Paper industry--Tacoma--1950-1960;

Logs from the St. Paul & Tacoma Lumber Company could be easily transported via railroad to the St. Regis Paper Company for pulp and paper operations. Both companies were rapidly expanding due to high demand for their products. View of construction materials placed near the St. Regis water tower and railroad tracks; for several years in the late 40's and early 50's, St. Regis underwent massive expansion with the construction of a multi-wall bag plant and kraft paper facilities. St. Regis operated 24 hours a day, seven days a week and total expenditures in 1951 would total nearly ten million dollars.

Progress photographs; St. Regis Paper Co. (Tacoma)--1950-1960; Paper industry--Tacoma--1950-1960;

Stand-by crane at St. Regis. This crane, manufactured by Ederer Engineering in Seattle, is able to move loads up and down nearly two stories inside this tall building along a horizontal trolly near the roof line of the building.

Paper industry--Tacoma--1950-1960; Hoisting machinery; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1950-1960;

An elevated view of the hydraulic barking process in the wood room at the St. Regis Paper plant shows unbarked logs in the background just received from the log storage pond. Logs then pass through the hydraulic barker under 1,400-pound pressure from jets of water stripping the logs in a matter of seconds. A man is seen near the center of the photograph using a tool to remove a rough spot from the log where a limb protruded. The cleanly barked logs will move on at once to the chipper where the log will be cut into chips 3/4 inch long and 1/8 inch thick, ready to be put into digesters. (TNT, 2/17/1952; St. Regis Paper Co. 1951 Annual Report)

Paper industry--Tacoma--1950-1960; Mechanical systems--Tacoma; Machinery; St. Regis Paper Co. (Tacoma)--1950-1960;

A driver is leaning on the cab of a truck from Veneer Chip Transport waiting his turn to unload chips at St. Regis Paper Company's new chip receiving station, completed in 1951. In Tacoma's fiber conservation program, an increasing percentage of the sulphate pulp is manufactured from chips made out of waste wood formerly burned at local wood-using plants. A big 12-ton hoist is upending the detached carrier bed of another truck at a 58 degree tilt to unload wood chips quickly. This equipment unloads three cars an hour. (St. Regis Paper Co. 1951 Annual Report)

Paper industry--Tacoma--1950-1960; St. Regis Paper Co. (Tacoma)--1950-1960; Trucks--Tacoma--1950-1960; Veneer Chip Transport (Tacoma);

A view of trucks and the 12-ton hoist used to dump full loads of wood chips at the St. Regis Paper plant. The chips flow by gravity onto a conveyor belt into piles that stand 60 feet into the air by means of an elaborate four-way pneumatic system. Moving the mountains of chips had been systemized into a push-button operation to deliver chips onto the correct pile according to species of wood, pine, white fir, hemlock or Douglas fir.

Paper industry--Tacoma--1950-1960; St. Regis Paper Co. (Tacoma)--1950-1960; Trucks--Tacoma--1950-1960; Veneer Chip Transport (Tacoma);

This elevated view of the St. Regis Paper Company yard shows the drive for trucks bringing wood chips to the pulp and paper mill at the mouth of the Puyallup River. A truck pulling a loaded trailer is seen at the left while a truck cab is seen backed up to a tall crane lifting a trailer to empty the chips into a chute. A truck cab pulling an empty trailer can be seen leaving the area in the middle of the photograph. Large silos (there are seven all together) seen on the right store wood ships for St. Regis' hungry pulp mill. Chips are transferred to the silos from outdoor piles before they go the digester.

Paper industry--Tacoma; St. Regis Paper Co. (Tacoma)--1950-1960; Trucks--Tacoma--1950-1960;

On spec. for the Times, Labor Day. Interior views of the St. Regis Paper Company. The paper machine had variable speeds from 450 - 2,100 feet per minute according to the kind of paper being made. St. Regis expected the new paper machine to run at a rate of 2,000 feet per minute and to be capable of producing 240 tons of paper per day.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Machinery;

St. Regis Paper Company dominated the Tacoma Tideflats with their ever expanding facilities at the terminus of the Puyallup Waterway. Taken from the top of the water tank. Ordered by St. Regis Paper Co., Mr. J.H. McCarthy.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950;

A new hydraulic barking and chipping plant was completed and began operating in 1948 at the Tacoma plant, this was one of the new buildings built in the expansion project. View of machinery used during the "wet end" paper producing process; photo ordered by Pusey & Jones Corporation, a machinery manufacturer from Wilmington, Delaware.

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Mechanical systems--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Pusey & Jones Corp. (Tacoma);

The Tacoma plant is thoroughly up to date in the paper making equipment, the auxiliaries and the new mill building itself; Tacoma's St. Regis is one of the most modern in the country. Interior view of St. Regis, paper producing machinery; photo ordered by Pusey & Jones Corporation, a machinery manufacturer from Wilmington, Delaware.

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Mechanical systems--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Pusey & Jones Corp. (Tacoma);

Kraft paper is produced in the following plants: East Pepperell, Massachusetts; Watertown, New York; Carthage, New York; Herrings, New York; Oswego, New York; Pensacola, Florida; and Tacoma, Washington. The other plants produce other items such as: Multiwall bags, Kraft pulp, and other types of specialty and coated papers. Interior view of St. Regis, view of paper producing machinery; photo ordered by Pusey & Jones Corporation, a machinery manufacturer from Wilmington, Delaware.

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Mechanical systems--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Pusey & Jones Corp. (Tacoma);

St. Regis was making kraft paper in six of their mills, they manufactured about 360,000 tons of kraft paper per year. Tacoma was the newest kraft paper producing mill; paper production began January 5, 1949. Interior view of St. Regis plant, control panels with gauges and dials monitor the plant's productivity; photo ordered by General Electric Company, machinery and equipment manufacturers.

Paper industry--Tacoma; Machinery; Industrial facilities--Tacoma; Control rooms--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

The new paper mill and paper production at St. Regis in Tacoma has helped the company strengthen its position in pulp, kraft paper, kraft board and multiwall bags. Interior view of St. Regis paper plant, machinery used during the paper production process; photo ordered by Pusey & Jones Corporation, a machinery manufacturer from Wilmington, Delaware.

Paper industry--Tacoma; Mechanical systems--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Pusey & Jones Corp. (Tacoma);

Dexter's Machine at St. Regis Paper Company. During 1950 the pulp mill at Tacoma was expanded. St. Regis made kraft paper at six mills with a combined capacity of approximately 360,000 tons a year. Ordered by Bird Machine Company, South Walpole, Massachusetts, Mr. V. Fahlgren.

Paper industry--Tacoma--1950-1960; Machinery; Industrial facilities--Tacoma--1950-1960; St. Regis Paper Co. (Tacoma)--1950-1960;

Men are loading a completed order of multiwall paper sacks at St. Regis Paper Company's new bag plant. A railroad freight car has been pulled up inside the covered loading dock at the plant and the bags, stacked on a pallet, are being delivered to the freight car with a forklift.

St. Regis Paper Co. (Tacoma)--1950-1960; Mills--Tacoma--1950-1960; Paper industry--Tacoma--1950-1960; Shipping--Tacoma--1950-1960; Railroad freight cars--Tacoma; Loading docks--Tacoma;

ca. 1979. Overview in 1979 of the St. Regis Kraft Co., 801 Portland Ave, paper mill on the Tideflats.

St. Regis Paper Co. (Tacoma)--1970-1980; Mills--Tacoma--1970-1980;

ca. 1959. Cement bags being produced in St. Regis's multi-wall bag plant in Tacoma. The bags are for Dacotah Portland Cement, produced by the South Dakota Cement plant in Rapid City, SD.

St. Regis Paper Co. (Tacoma)--1950-1960; Mills--Tacoma--1950-1960; Paper industry--Tacoma--1950-1960;

Progress photographs of St. Regis Paper Co. expansion taken on August 11, 1960, on behalf of Malcolm McGhie, industrial consultant, New York. Long general view of machine room taken from balcony on north end. The machine room was enlarged at the Kraft paper and board mill located in the Tideflats during a twenty million dollar expansion scheduled for 1960-61. A new paper machine would be added by year's end which would increase and diversify the Tacoma mill's paper and board capacity. (1960 Annual Report, p. 6, 7)

St. Regis Paper Co. (Tacoma)--1960-1970; Progress photographs; Machinery;

View of bark conveyer at St. Regis' Tacoma plant. One small log is resting on side of conveyer belt. Fibre Making Processes, Inc., had its 12 foot barking drum installed in early July, 1961. Photograph ordered by Fibre Making Processes, Inc., Chicago.

St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Machinery;

The discharge end of a new Fibre Making Processes, Inc., barking drum with view of discharge gate and cut small logs; barking drum located at St. Regis Paper Co.'s Tacoma plant. The bark would be removed by abrasive action of the rotating mechanical drum. Photograph ordered by Fibre Making Processes, Inc., Chicago.

St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Machinery;