ca. 1937. St. Regis Kraft Co.; filtering plant circa 1937. (WSHS)

St. Regis Paper Co. (Tacoma)--1930-1940; Mills--Tacoma--1930-1940; Paper industry--Tacoma--1930-1940;

St. Regis was one of the largest industries in Tacoma and was located in Tacoma's Tide Flats industrial area. The company was undergoing a big expansion project in 1948. This building, currently under construction, would be used to manufacture pulp. Exterior view of St. Regis Paper Company--Kraft Pulp Division industrial plant (T. Times, 8/31/48, p. 22).

Industrial facilities--Tacoma; Aerial photographs; Waterfronts; Paper industry--Tacoma--1940-1950; St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis Company announced that major plant reconditioning and expansions would begin. This will help reduce the levels of air pollution and increase the air quality in Tacoma. A reduction of solids in smoke has caused a reduction in odor. St. Regis is installing Cottrell smoke treatments in their plant with an estimated cost of $6,000,000. This process should help reduce air pollution. View of laborers applying foam glass insulation to roof at St. Regis Paper Company (T.Times, 7/31/48, p. 1).

Roofs--Tacoma; Paper industry--Tacoma--1940-1950; Industrial facilities--Tacoma; Laborers--Tacoma; Air quality--Tacoma; Air pollution--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

Progress photographs at St. Regis, St. Regis Paper Company, Kraft Pulp Division. A view of the interior of one of the new buildings at St. Regis with the exterior walls still missing. A row of Jordans, each driven by a 400 hp. motor, is laid out close to what will be an exterior wall. The Jordans will prepare stock for the paper machines that have not yet been built. (St. Regis 1949 Annual Report)

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Factories--Tacoma--1940-1950;

Port of Tacoma aerials. A view of St. Regis and the nearly completed kraft paper plant seen in the foreground. The company is located along the Puyallup Waterway on the Tacoma tideflats.

Aerial photographs; Progress photographs; St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950;

An aerial view looking east across the Tacoma tideflats with St. Regis Paper Company in the foreground. St. Regis was nearing completion of a $6 million addition to their kraft paper plant and adding a multi-wall bag plant. They have been at this location on the tideflats since 1936.

Aerial photographs; St. Regis Paper Co. (Tacoma)--1940-1950; Progress photographs; Paper industry--Tacoma--1940-1950; Lumber industry--Tacoma--1940-1950; Industrial facilities--Tacoma--1940-1950;

Progress photograph at plant, St. Regis Paper Company, Mr. McCarthy. Roofing on the addition has nearly been completed. According to the 1949 St. Regis Annual Report the company operated mills and plants at 23 locations in the United States and six plants in Canada and other foreign countries. The company was organized in 1899 and built a mill at Deferiet, New York, that same year.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Factories--Tacoma--1940-1950; Progress photographs;

Interior progress photograph, St. Regis, McCarthy. The exterior walls of the new Kraft Paper plant have been installed and the row of "Jones Majestic" Jordans have been connected along the wall. The Jordans, each driven by a 400 h.p. motor, cut the fiber and prepared it for the paper machines which are nearing completion further along the wall. (TNT, 2/15/1949, p.B-3)

St. Regis Paper Co. (Tacoma)--1940-1950; Progress photographs; Machinery; Factories--Tacoma--1940-1950; Paper industry--Tacoma--1940-1950;

Since the 1930's St. Regis had been investing money to eliminate the offensive "odor" produced by the plant; the company would continue to address this issue and pollution questions for many years. Interior view of plant and view of General Electric machinery; photo ordered by General Electric Company, machinery and equipment manufacturers.

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

Interior view of St. Regis, view of paper producing machinery, two unidentified laborers are working with what appears to be a large roll of kraft paper, "Ederer Engineers" crane is being used, this machine was manufactured in Seattle. Photo ordered by Pusey & Jones Corporation, a machinery manufacturer from Wilmington, Delaware.

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Mechanical systems--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Pusey & Jones Corp. (Tacoma);

St. Regis has been expanding and improving their facilities and plants throughout the world based on research being conducted in their Research and Development Departments. The company's laboratories are ranked among the highest in the paper and pulp industry. View of unidentified men in research and testing area in Tacoma's St. Regis plant in this photograph dated January 21, 1949. (S4)

Paper industry--Tacoma--1940-1950; Product inspection--Tacoma; Testing--Tacoma; Research facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

The St. Regis laboratories were conducting various types of research related to the pulp and paper industry. In 1949, they were focusing in an extensive program connected with pulping, new paper coatings, and new paper products. The laboratories helped maintain high levels of quality control. View of unidentified men in research and testing area at Tacoma's St. Regis plant. (S5)

Paper industry--Tacoma--1940-1950; Product inspection--Tacoma; Testing--Tacoma; Research facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis was able to broaden their range of products and increase production capacity by enlarging their Tacoma plant and beginning the production of kraft paper. Interior view of St. Regis plant, Ederer cranes with 24 ton capacity are being used in paper mill. Photo ordered by Ederer Engineering Company, cranes, hoist and veneer machinery manufacturers based out of Seattle, Washington.

Paper industry--Tacoma; Hoisting machinery; Pulleys; Equipment; Machinery industry--Tacoma; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Ederer Engineering Co. (Seattle);

Tacoma's St. Regis plant has been extremely busy since the end of World War II. The pulp plant has been modernized and a paper mill has been added; these combined improvements strengthen the company's position in pulp, Kraft paper, Kraft board and multiwall bags. Aerial view of St. Regis plant, located in Tacoma's tideflats area.

Paper industry--Tacoma--1940-1950; Aerial photographs; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

An employee at St. Regis watches to be sure all goes well in the wet pulp to paper process in the new kraft paper plant. Ordered by McGraw Hill Publishing Co., Inc., New York, NY.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950;

Chip feeder at St. Regis plant, Link Belt Company, Mr. R.W. Johnson. Bark was first removed from logs and moved to the woodroom. From the woodroom chunks of wood were moved to wood chippers where they were broken into fine chips. These went into a hopper in the top of a digester where the chips were broken down by chemicals and the resulting pulp was washed and bleached. This large, funnel-shaped machine handled the fine chipping and delivery to the digester.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Machinery;

In 1949 St. Regis ranked among the top companies in the paper and pulp industry. Interior view of St. Regis plant, Ederer cranes with 24 ton capacity are being used in paper mill. Photo ordered by Ederer Engineering Company, cranes, hoist and veneer machinery manufacturers based out of Seattle, Washington.

Paper industry--Tacoma--1940-1950; Hoisting machinery; Pulleys; Equipment; Machinery industry--Tacoma; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Ederer Engineering Co. (Seattle);

Logs for the St. Regis pulp mill were originally supplied by the St. Paul and Tacoma lumber mill; these two companies established a partnership since the beginning of St. Regis' operations. In 1949 St. Regis began producing paper at the Tacoma plant. View of General Electric machinery; photo ordered by General Electric Company, machinery and equipment manufacturers.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma--1940-1950; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

Interior view of St. Regis plant, paper manufacturing department; The Electric Construction Company, an engineering and contracting business, logo and information appears in the upper left corner. View of General Electric machinery; photo ordered by General Electric Company, machinery and equipment manufacturers.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma); Electric Construction Co. (Tacoma);

On spec. for the Times, Labor Day. Interior views of the St. Regis Paper Company. As of January 1947 St. Regis Paper Company used up to 17 million gallons of water a day in its pulp processing. The plant had many miles of piping throughout all of its processes. In December 1946 a paper machine was installed.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950;

On spec. for the Times, Labor Day. Interior view of the St. Regis Paper Company. From the woodroom chunks of wood were moved to wood chippers where they were broken into fine chips. These went into a hopper in the top of a digester where the chips were broken down by chemicals and the resulting pulp was washed and bleached, looking much like white snow. The paper would be nearly all water at this part of the process. It was sprayed in a thin sheet on screens where it was gradually dried out over a long roller.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950;

In this aerial view of the Tacoma tideflats the St. Regis Paper Company can be found at the base of the large plume of smoke and steam in the center of the picture. The St. Regis Paper Company was established in Tacoma in 1928 and rebuilt and modernized in 1936. In August 1947 the company announced plans for a $6 million addition of a Kraft paper mill and multi wall bag plant, to be operational the first quarter of 1949.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Aerial photographs; Tacoma Tideflats (Tacoma);

In August of 1947 an unidentified "boom man", wearing "corked" boots and wielding a pikepole, was photographed sorting logs for the St. Regis Paper Company. St. Regis was established in Tacoma in 1928 and rebuilt and modernized in 1936. In August 1947 the company announced plans for a $6 million addition of a Kraft paper mill and a multi-wall bag plant. Simpson Tacoma Kraft took over the St. Regis mill in Tacoma in 1985. (On spec. for the Times, Labor Day.) TPL-9492

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Commencement Bay (Wash.); Logs;

On spec. for the Times, Labor Day. Interior views of the St. Regis Paper Company. William Youngchild, a veteran Tacoma papermaker with 55 years in the industry, watches rolls of pulp in one of the final processes at St. Regis mill.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Youngchild, William; Machinery;

This view of an open electrical control panel was taken in August, 1951, at the St. Regis Paper Company. New construction was continuing at the Portland Avenue plant as the piles of dirt and trash indicates. A new multiwall bag plant was completed in 1952; it was equipped to produce a full range of bags with six production lines. The new plant also had its own printing presses and a complete art and engraving department.

Progress photographs; St. Regis Paper Co. (Tacoma)--1950-1960; Paper industry--Tacoma--1950-1960;

Construction continues on new buildings at the St. Regis Paper Company on Portland Avenue. Still in its early stages in August, 1951, the new buildings have been mapped out with low walls but as the mounds of dirt indicate, no flooring is in place. St. Regis was nearing completion of its eight year expansion plan; this structure is probably the multiwall bag plant which was completed in 1952. Anticipated to add an additional 400 workers to the St. Regis payroll, the new plant, constructed of steel and concrete, would be used for the production of industrial-use bags for cement, fertilizer, and other heavy-duty items. Hooker Electrochemical's tank cars can be seen in the background close to the St. Regis water tower.

Progress photographs; St. Regis Paper Co. (Tacoma)--1950-1960; Paper industry--Tacoma--1950-1960; Factories--Tacoma--1950-1960;

Conveyor link belt at St. Regis Paper Company. Link Belt Company. Long conveyor containing wood chips.

St. Regis Paper Co. (Tacoma)--1950-1960; Paper industry--Tacoma--1950-1960; Lumber industry--Tacoma--1950-1960; Conveying systems--Tacoma--1950-1960;

Interiors at St. Regis Tacoma plant for 1952 Annual Report showing a recovery boiler. A major expansion program completed in 1952 increased the company's production capacity. St. Regis products made in Tacoma included sulphate pulp, kraft paper and board and multiwall bags. Products made in their other plants also included printing and publications papers and industrial and decorative plastics. A forerunner in conservation and recycling, Kaiser operated an efficient plant and originated the use of wood chips and ends in the paper process.

St. Regis Paper Co. (Tacoma)--1950-1960; Paper industry--Tacoma--1950-1960;

Interior exposure of gauges for the new Swenson Evaporator Co. installations at St. Regis Paper Co. Tacoma. An 8 year expansion program for the company was to be completed in 1952. Part of this program was focused on recycling and reusing processing elements in an efficient manner. The Evaporator was used to recover chemicals used. (TNT 2-17-1952, pg. C-14)

St. Regis Paper Co. (Tacoma)--1950-1960; Paper industry--Tacoma--1950-1960;

Exterior shot of new Recovery Building at St. Regis Paper Company. This new building housed the six story high combustion furnace and the Koppers electric precipitator. The precipitator collected odor bearing particles before they could escape the chimney into the open air. This was part of the company's program to reduce odor caused by the chemical processes of producing pulp. (TNT 2-17-1952, pg. C-14)

St. Regis Paper Co. (Tacoma)--1950-1960; Paper industry--Tacoma--1950-1960;