ca. 1937. St. Regis Kraft Co.; filtering plant circa 1937. (WSHS)

St. Regis Paper Co. (Tacoma)--1930-1940; Mills--Tacoma--1930-1940; Paper industry--Tacoma--1930-1940;

August, 1960, progress photographs of St. Regis Paper Co. mill ordered by Malcolm McGhie, industrial consultant, New York. View of portion of St. Regis Paper Co. plant in the Tideflats including stacks of logs piled adjacent to railroad tracks. Cylinder-shaped structure is probably the new continuous digester which was expected to increase capacity by 325 tons per day. The tower is 110 feet high. Capital expenditures for 1960 & 1961 included $20,893,881 for the Kraft mill expansion of St. Regis' Tacoma plant. This amount, by far, was the highest budgeted for those years and accounted for over one-third of the money planned for new construction and plant improvement. The addition to the Tacoma mill was made to permit St. Regis to furnish a larger part of the needs of the company's own box plants and bag factories in the western and midwest states. (1960 Annual report, p. 3, 6, TNT 11-13-60, A-18)

St. Regis Paper Co. (Tacoma)--1960-1970; Progress photographs; Logs; Machinery;

View of enlarged machine room in the St. Regis Paper Co.'s kraft paper and board mill on November 28, 1960. This progress photograph was taken on behalf of Malcolm McGhie, industrial consultant from New York City, for possible use in St. Regis' 1960 Annual report. A new paper machine was being erected in 1960 which would increase and diversify Tacoma's paper and board capacity. (St. Regis 1960 Annual Report, p. 7)

St. Regis Paper Co. (Tacoma)--1960-1970; Progress photographs; Machinery;

St. Regis Paper Co. at night with lighted Christmas display on top of building. Union Oil and its tanks with the famous 76 logo are in the right foreground on the City (now Foss) Waterway.

Paper industry--Tacoma--1950-1960; St. Regis Paper Co. (Tacoma)--1950-1960; Christmas decorations; Union Oil Co. of California (Tacoma);

1973 Richards stock footage. Aerial view in July of 1973 of the St. Regis Paper Co. The Puyallup Waterway is directly behind the plant. Due to St. Regis' vigorous efforts to curtail pollution, there is no sign of the plant's usual massive smoke emissions. TPL-5484

St. Regis Paper Co. (Tacoma)--1970-1980; Aerial views; Puyallup Waterway (Tacoma);

The pulp capacity at Tacoma has been planned so that this mill can make adequate quantities of bleached sulphate pulp available to the market, and at the same time supply the necessary bleached and unbleached sulphate pulp for its new high producing Kraft paper machine. Aerial view of St. Regis plant, located in Tacoma's tideflats area.

Paper industry--Tacoma--1940-1950; Aerial photographs; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

Progress photographs at St. Regis, St. Regis Paper Company, Kraft Pulp Division. St. Regis Paper Company was well along in a big expansion program at the Tacoma plant, adding a multiwall bag plant as well as a pulp manufacturing plant. Tacoma was one of the locations of St. Regis that supplied pulp from their own mills for their kraft paper production. Adding the exterior to the new construction is nearly complete. (T.Times, 8/23/1948, p.5)

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Factories--Tacoma--1940-1950;

St. Regis office, Times, Maybin. St. Regis was planning immediate construction of $6 million kraft paper and bag mills. These three key men, studying plans for the construction, are, L-R, J.H. McCarthy, plant engineer, Walter DeLong, Vice President and director, manager of Tacoma operations, and Adolph C. McCorry, plant superintendent. Piles of logs and a water tower are seen outside the windows. St. Regis had been at this location since 1936. (T.Times, 8/21/1947, p.1)

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Architectural drawings; Logs; Water towers--Tacoma--1940-1950; McCarthy, J.H.; DeLong, Walter; McCorry, Adolph C.;

Aerial view, taken in August of 1948, of the large St. Regis Paper Co. plant located in Tacoma's industrial Tideflats. Waterway in center is the Puyallup Waterway. St. Regis was undergoing expansion as depicted by the unfinished building in the foreground. Three years later a big new bag plant would be built, adding to Tacoma's payroll.

Aerial photographs; Aerial views; St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Industrial facilities--Tacoma--1940-1950; Building construction--Tacoma--1940-1950; Puyallup Waterway (Tacoma);

A view of the interior of the kraft paper mill at St. Regis Paper Company. The new high speed kraft paper machine was designed to operate at 2000 feet per minute and produce paper nearly fourteen feet wide (166 inches). It started operation January 5, 1949. The Poodle Dog Restaurant in Fife, Washington, had a large display of local points of interest on one of their walls. Copy of customer's negative for Poodle Dog enlargement. (St. Regis Paper Company Annual Report for 1949)

St. Regis Paper Co. (Tacoma)--1940-1950; Poodle Dog (Fife); Mills--Tacoma--1940-1950; Paper industry--Tacoma--1940-1950;

St. Regis is one of the pulp and paper companies that carry the paper producing cycle all the way from wood, to pulp, to paper, and into other various products. View of unidentified worker sitting in an operating booth, he is likely in the area where logs are kept prior to the wood chipping process.

Paper industry--Tacoma--1940-1950; Laborers--Tacoma; Logs; Machinery; Equipment; Industrial facilities--Tacoma; Lumber industry--Tacoma--1940-1950; St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis' first mill was located in Deferiet, New York; they now had paper and pulp mills located throughout the world. Interior view of the Tacoma St. Regis plant, an unidentified man is working with recently installed equipment. Photo ordered by Drew Engineering Company, an industrial air systems business, based out of Portland, Oregon.

Paper industry--Tacoma--1940-1950; Laborers--Tacoma; Machinery; Industrial facilities--Tacoma; Drew Engineering Co. (Portland, Or.); St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis began producing paper in January 1949, prior to this the company had primarily been a pulp mill and produced Multiwall bags. Interior view of St. Regis plant, a laborer is working with a General Electric control panel; photo ordered by General Electric Company, machinery and equipment manufacturers.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; Control rooms--Tacoma; Laborers--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

Interior view of St. Regis plant, this battery of ten "Jones Majestic" Jordans is each driven by a 400 horsepower motor, the Jordans prepare stock for the Fourdrinier paper machines. Photo ordered by E. D. Jones and Sons Company, machinery and equipment manufacturers based out of Pittsfield, Massachusetts.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; E.D. Jones & Sons Co. (Tacoma);

St. Regis mills can be found in 23 locations across the United States, they have six plants in Canada, and one in Belgium, Brazil and Argentina. Interior view of St. Regis, view of paper producing machinery; photo ordered by Pusey & Jones Corporation, a machinery manufacturer from Wilmington, Delaware.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Pusey & Jones Corp. (Tacoma);

St. Regis company spent the last few years focusing on expanding the Tacoma plant, the Pensacola, Florida plant would begin expanding during 1949. Interior view of St. Regis plant; battery of jordans each driven by a 400 horsepower motor, these prepare stock for the Fourdrinier paper machine. View of General Electric machinery; photo ordered by General Electric Company, machinery and equipment manufacturers.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

Interior view of plant, large rolls of paper are being processed after going through the "wet end" machine, they are at the pre-dryer stage. The paper then goes through a "Flakt air dryer" prior to being cut, baled, packaged and distributed. View of General Electric machinery; photo ordered by General Electric Company, machinery and equipment manufacturers. TPL-6811

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

St. Regis had started producing kraft paper in January 1949, the tacoma plant had been remodeled over a long period of time and was operating at full capacity. View of St. Regis Paper Company Kraft Pulp Division; new mill on left, new laboratory is currently under construction; building contractor is Howard S. Wright and Company (T. Times, 3/13/49, p. 19).

Industrial facilities--Tacoma; Remodeling--Tacoma; Paper industry--Tacoma--1940-1950; Building construction--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis consistently worked on intensive product development and sales promotion activities, not only to improve the penetration into existing markets, but to open up entirely new fields. Tacoma's St.Regis plant would have their own research laboratory within the industrial site. Interior view of plant, paper roll is being moved by a large "Ederer" crane.

Paper--Tacoma; Paper industry--Tacoma--1940-1950; Laborers--Tacoma; Hoisting machinery; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Ederer Engineering Co. (Seattle);

Aerial view shows progress being made on new construction for the St. Regis Paper Company in September, 1950. Established as a company in 1899, St. Regis was open for business in Tacoma in 1928. Rebuilt and modernized in 1936, St. Regis bought additional acreage from the St. Paul Tacoma Lumber Company in 1947 to add a paper mill and multi wall bag plant. According to the St. Regis 1950 annual report, Tacoma's expansion of their pulp mill would enlarge the pulp capacity from 115,000 to 135,000 tons a year. The new capacity will be in production in 1951.

St. Regis Paper Co. (Tacoma)--1950-1960; Paper industry--Tacoma--1950-1960; Factories--Tacoma--1950-1960; Progress photographs--1950-1960; Aerial photographs;

An engineer works on machinery, a paper "tensiometer," at the St. Regis Paper Co., Kraft pulp division. The equipment has been "locked out" with a key, so that it can not be started while the engineer is working. The two year old paper machine was approximately a block long. In 1952, St. Regis produced 400 tons of unbleached pulp per day. 160 of those tons were bleached and made into dried heavy sheets & placed together into 400 lb. bales, put into boxcars & shipped to other mills or the open market. The remaining 240 tons was used to make multiwalled bags in the company's bag plant or wrapping paper. Picture taken for General Electric Supply, Apparatus Department.

Paper industry--Tacoma--1950-1960; Mechanical systems--Tacoma; Machinery; St. Regis Paper Co. (Tacoma)--1950-1960;

Koppers Precipitator at St. Regis Paper Co. Interior of building with brick wall with several round tanks of various sizes on top with pipes and valves coming out - some marked "danger-high voltage." St. Regis completed an eight year expansion and improvement program in 1952. Included in that program was the construction of a new combustion engineering company furnace. The six story high furnace had a capacity of 225 tons and was built in conjunction with the Koppers electric precipitator. The precipitator collected odor bearing particles before they escaped the chimney into the air thus reducing pollution and odor. (TNT 2-17-1952, pg. C-14)

St. Regis Paper Co. (Tacoma)--1950-1960; Paper industry--Tacoma--1950-1960;

An aerial view of St. Regis Paper Company plant showing the completed multi-wall bag plant (with the dark roof dotted with vents) and the narrow kraft-paper mill.

Paper industry--Tacoma--1950-1960; Mills--Tacoma; Logs; St. Regis Paper Co. (Tacoma)--1950-1960;

An aerial view of St. Regis Paper Company. Logs would be pulled up the ramp in the foreground from the log pond into the woodroom in the building close to the edge of Commencement Bay. TPL-5903

Paper industry--Tacoma--1950-1960; Mills--Tacoma; Logs; St. Regis Paper Co. (Tacoma)--1950-1960;

Seven men and women are operating machinery at St. Regis Paper Company's new bag plant. Rolls of brown paper are seen on the far right. The paper is fed into folding machines which eject the multiple-layer tubes onto a conveyor belt on the left. Here women are removing and stacking the brown paper tubes ready for the next operation in completing the bags, sewing the ends closed.

St. Regis Paper Co. (Tacoma)--1950-1960; Mills--Tacoma--1950-1960; Paper industry--Tacoma--1950-1960;

Exterior of St. Regis Paper Company's new bag plant on the Tacoma tideflats with Tacoma in the background.

St. Regis Paper Co. (Tacoma)--1950-1960; Mills--Tacoma--1950-1960; Paper industry--Tacoma--1950-1960;

St. Regis Paper Company was undergoing constant expansion at its Portland Avenue plant; in this August, 1951, photograph, new building forms are placed on brick stands. In recent years St. Regis had expanded their kraft paper operations and was to add a multiwall bag plant. They had installed a 6.5 million dollar paper mill and machine to increase their product offerings beyond pulp. The paper machine was the first entirely designed and engineered by the company; it was to eventually produce more than 80,000 tons of paper and paperboard a year.

Progress photographs; St. Regis Paper Co. (Tacoma)--1950-1960; Paper industry--Tacoma--1950-1960;

Aerial photograph to show the steel work on a new building at St. Regis, Tacoma. Construction of a bag plant at the St. Regis Paper company started in June 1951 with the driving of piling as the first step. The addition was built of steel and concrete and would be used for the production of industrial-use bags for cement, fertilizer and other materials needing heavy-duty holders. When completed, this plant would replace the leased plant at Seattle. (TNT 6/15/1951; St. Regis Paper Company 1951 Annual Report)

St. Regis Paper Co. (Tacoma)--1950-1960; Progress photographs; Building construction--Tacoma--1940-1950; Aerial photographs; Paper industry--Tacoma--1950-1960;

1936 Daily operations at St. Regis. Although the specific St. Regis plant was not identified by the photographer, this was probably the Tacoma St. Regis located at 801 Portland Ave. Various sections of the facility and its machinery were photographed in a two-day period in December of 1936 by the Boland studios. The machine above may have been used to dry pulp since steam is shown rising from the rear roller. A million dollars had been spent to transform the Tacoma plant into a modern facility so that production of 60,000 tons of bleached pulp per year could be achieved. G37.1-016 (T.Times 10-14-36, p. 5-article; T.Times 11-25-36, p. 5-article)

St. Regis Paper Co. (Tacoma)--1930-1940; Machinery; Paper industry--1930-1940; Lumber industry--1930-1940; Mills--Tacoma--1930-1940;

1936 Daily operations at St. Regis. View of large funnels and other unidentified machinery in photograph taken on December 21, 1936. Plant is believed to be the St. Regis Tacoma location, 801 Portland Ave. The Tacoma facility had recently undergone an expensive remodeling to be transformed into a modern plant where 60,000 tons of bleached pulp were expected to be produced a year. Over 800 men had been employed in the reconstruction process boosting St. Regis' payroll to $15,000 a week. Much new machinery was purchased including electric saws and machines to bark logs. By late November of 1936, the Tacoma St. Regis had commenced operations with a crew of 250. A bleaching unit would be ready in three months. (T.Times 10-14-36, p. 5-article; T. Times 11-25-36, p. 5-article)

St. Regis Paper Co. (Tacoma)--1930-1940; Machinery; Paper industry--1930-1940; Lumber industry--1930-1940; Mills--Tacoma--1930-1940;