Riegel Carolina Paper & Pulp Mill looking out on the docks on a ship named Mogul with a striped and lettered G figure.

Fischer & Porter Co. West Tacoma Newsprint Co. in Steilacoom, WA.

St. Regis office, Times, Maybin. St. Regis was planning immediate construction of $6 million kraft paper and bag mills. These three key men, studying plans for the construction, are, L-R, J.H. McCarthy, plant engineer, Walter DeLong, Vice President and director, manager of Tacoma operations, and Adolph C. McCorry, plant superintendent. Piles of logs and a water tower are seen outside the windows. St. Regis had been at this location since 1936. (T.Times, 8/21/1947, p.1)

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Architectural drawings; Logs; Water towers--Tacoma--1940-1950; McCarthy, J.H.; DeLong, Walter; McCorry, Adolph C.;

St. Regis is one of the pulp and paper companies that carry the paper producing cycle all the way from wood, to pulp, to paper, and into other various products. View of unidentified worker sitting in an operating booth, he is likely in the area where logs are kept prior to the wood chipping process.

Paper industry--Tacoma--1940-1950; Laborers--Tacoma; Logs; Machinery; Equipment; Industrial facilities--Tacoma; Lumber industry--Tacoma--1940-1950; St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis' first mill was located in Deferiet, New York; they now had paper and pulp mills located throughout the world. Interior view of the Tacoma St. Regis plant, an unidentified man is working with recently installed equipment. Photo ordered by Drew Engineering Company, an industrial air systems business, based out of Portland, Oregon.

Paper industry--Tacoma--1940-1950; Laborers--Tacoma; Machinery; Industrial facilities--Tacoma; Drew Engineering Co. (Portland, Or.); St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis began producing paper in January 1949, prior to this the company had primarily been a pulp mill and produced Multiwall bags. Interior view of St. Regis plant, a laborer is working with a General Electric control panel; photo ordered by General Electric Company, machinery and equipment manufacturers.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; Control rooms--Tacoma; Laborers--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

Interior view of St. Regis plant, this battery of ten "Jones Majestic" Jordans is each driven by a 400 horsepower motor, the Jordans prepare stock for the Fourdrinier paper machines. Photo ordered by E. D. Jones and Sons Company, machinery and equipment manufacturers based out of Pittsfield, Massachusetts.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; E.D. Jones & Sons Co. (Tacoma);

St. Regis mills can be found in 23 locations across the United States, they have six plants in Canada, and one in Belgium, Brazil and Argentina. Interior view of St. Regis, view of paper producing machinery; photo ordered by Pusey & Jones Corporation, a machinery manufacturer from Wilmington, Delaware.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Pusey & Jones Corp. (Tacoma);

St. Regis company spent the last few years focusing on expanding the Tacoma plant, the Pensacola, Florida plant would begin expanding during 1949. Interior view of St. Regis plant; battery of jordans each driven by a 400 horsepower motor, these prepare stock for the Fourdrinier paper machine. View of General Electric machinery; photo ordered by General Electric Company, machinery and equipment manufacturers.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

Interior view of plant, large rolls of paper are being processed after going through the "wet end" machine, they are at the pre-dryer stage. The paper then goes through a "Flakt air dryer" prior to being cut, baled, packaged and distributed. View of General Electric machinery; photo ordered by General Electric Company, machinery and equipment manufacturers. TPL-6811

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

Left end of bridge and trolley, Harry S. Pearson and R.E. Morgan. Large rolls of paper are lying on the floor of a storage room while a man moves one of the rolls using a hoist maneuvered from a control booth near the ceiling.

Paper--Tacoma--1940-1950; Paper industry--Tacoma--1940-1950; Hoisting machinery;

St. Regis consistently worked on intensive product development and sales promotion activities, not only to improve the penetration into existing markets, but to open up entirely new fields. Tacoma's St.Regis plant would have their own research laboratory within the industrial site. Interior view of plant, paper roll is being moved by a large "Ederer" crane.

Paper--Tacoma; Paper industry--Tacoma--1940-1950; Laborers--Tacoma; Hoisting machinery; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Ederer Engineering Co. (Seattle);

Progress photographs at St. Regis, St. Regis Paper Company, Kraft Pulp Division. St. Regis Paper Company was well along in a big expansion program at the Tacoma plant, adding a multiwall bag plant as well as a pulp manufacturing plant. Tacoma was one of the locations of St. Regis that supplied pulp from their own mills for their kraft paper production. Adding the exterior to the new construction is nearly complete. (T.Times, 8/23/1948, p.5)

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Factories--Tacoma--1940-1950;

The completion of the kraft paper mill in Tacoma, allowed St. Regis a considerable increase in the paper production industry. View of the St. Regis Paper Company's crew at Camp #2, located in Mineral, Washington; logs have been loaded onto the train cars, and will be transported out of Mineral Forest. TPL-5680

Paper industry--Tacoma--1940-1950; Lumber industry--Tacoma--1940-1950; Logs; Firs; Forests--Mineral; Cutover lands--Mineral--1940-1950; Railroad cars--Mineral; Railroad tracks--Mineral; Railroads--Mineral; St. Regis Paper Co. (Mineral);

St. Regis was established in Tacoma in 1928, the New York firm purchased the industrial site, modernized it and began operations in 1936. View of the St. Regis Paper Company's crew at Camp #2, located in Mineral, Washington; high line yarder is moving the logs and safely loading them onto trucks.

Woodcutters--1940-1950; Loggers--Mineral--1940-1950; Paper industry--Tacoma--1940-1950; Lumber industry--Tacoma--1940-1950; Logs; Firs; Forests--Mineral; Cutover lands--Mineral--1940-1950; Woodcutting--Mineral; St. Regis Paper Co. (Mineral);

St. Regis consistently worked on intensive product development and sales promotion activities, not only to improve the penetration into existing markets, but to open up entirely new fields. View of the St. Regis Paper Company's crew at Camp #2, located in Mineral, Washington; giant firs have been cut and will be used at the St. Regis paper mill located in Tacoma.

Woodcutters--1940-1950; Loggers--Mineral--1940-1950; Paper industry--Tacoma--1940-1950; Lumber industry--Tacoma--1940-1950; Logs; Firs; Forests--Mineral; Cutover lands--Mineral--1940-1950; Woodcutting--Mineral; St. Regis Paper Co. (Mineral);

The pulp capacity at Tacoma has been planned so that this mill can make adequate quantities of bleached sulphate pulp available to the market, and at the same time supply the necessary bleached and unbleached sulphate pulp for its new high producing Kraft paper machine. Aerial view of St. Regis plant, located in Tacoma's tideflats area.

Paper industry--Tacoma--1940-1950; Aerial photographs; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

Aerial photograph to show the steel work on a new building at St. Regis, Tacoma. Construction of a bag plant at the St. Regis Paper company started in June 1951 with the driving of piling as the first step. The addition was built of steel and concrete and would be used for the production of industrial-use bags for cement, fertilizer and other materials needing heavy-duty holders. When completed, this plant would replace the leased plant at Seattle. (TNT 6/15/1951; St. Regis Paper Company 1951 Annual Report)

St. Regis Paper Co. (Tacoma)--1950-1960; Progress photographs; Building construction--Tacoma--1940-1950; Aerial photographs; Paper industry--Tacoma--1950-1960;

St. Regis Paper Company (Kraft Pulp Division), overaged destroyer to be sunk for breakwater. The 20-year-old destroyer, name unknown, was to be sunk in Commencement Bay to provide protection for the St. Regis wharf. Her sister ship had previously been scuttled in British Columbia, also for use as a breakwater. Both ships had been resting in Lake Washington for ten years. (T. Times, 9-19-1940, p. 1- alt. photo)

Paper industry--Tacoma--1940-1950; St. Regis Paper Co. (Tacoma)--1940-1950; Scuttling of warships--United States; Warships--Tacoma--1940-1950;

Doomed Destroyer read the mournful heading for this front-page photograph than ran in the Thursday, September 19, 1940 edition of the Tacoma Times. The 20-year-old warship was being scuttled in Commencement Bay that day to serve as a breakwater to protect the St. Regis wharf. The red-painted 330-foot destroyer hulk, name since lost, had been owned by the Foss company for the past ten years. Derrick of the pile driver used in the operation is in the background along with a tugboat and St. Regis's dock. (T. Times 9-19-1940, p. 1)

Paper industry--Tacoma--1940-1950; St. Regis Paper Co. (Tacoma)--1940-1950; Warships--Tacoma--1940-1950; Tugboats--Tacoma--1940-1950; Scuttling of warships--United States; Piers & wharves--Tacoma--1940-1950; Hoisting machinery;

Birchfield Boiler; heat exchanger and casing. This huge condenser is one of a pair manufactured by Birchfield Boiler for the St. Regis Paper and Pulp plant. The condenser is used to recover waste heat from pulp digesters. Because they come in contact with corrosive substances, the tubes are stainless steel. There are 1184 of them, more than 3 1/2 miles of tubing in each unit. The shells and ends are made of 1 1/2 inch steel plate. Each condenser was valued at $25,000. (TNT 3/13/1955, pg. B-17)

Birchfield Boiler, Inc. (Tacoma); Boilers; Boiler industry--Tacoma; Paper industry--Tacoma--1950-1960;

ca. 1953. Riegel Carolina Paper & Pulp Mill, Acme, N. Carolina. Ordered by General Electric. Mountains of timber piled up for processing into paper and pulp. What appears to be a long conveyer belt carries the timber into the mill. Hoisting machinery available for lifting the timber onto the belt.

Riegel Carolina (Acme, N.C.); Mills--North Carolina--Acme; Factories--North Carolina--Acme; Paper industry--North Carolina--Acme; Industrial facilities--North Carolina--Acme;

This exterior view of a St. Regis Paper Co. plant, possibly Tacoma's, was taken on July 3, 1953, at the request of the Johns-Manville Sales Corporation. Johns-Manville handled asbestos products; it could be that the exterior of the building has asbestos siding. Johns-Manville's Tacoma office was located at 680 E. 11th St. in the Tideflats area; they were a nationwide company established in the mid-1850's.

Johns-Manville Sales Corp.; St. Regis Paper Co.; Industrial facilities;

Exterior of industrial facilities. This is possibly the Tacoma location of St. Regis Paper Co. in a photograph taken on July 3, 1953. The multi-storied buildings appear to have siding rather than brick or concrete block. The photograph, one of several, was taken at the request of the Johns-Manville Sales Corporation which sold asbestos products. It is possible that the siding on the buildings had an asbestos content.

Johns-Manville Sales Corp.; St. Regis Paper Co.; Industrial facilities;

ca. 1953. A P & H crane operator maneuvers his winch to gather logs, possibly to drop them in the log storage pile beside him. This photograph was possibly taken in 1953, perhaps at one of St. Regis Paper Co.'s facilities. St. Regis had plants and mills all over the country, including the southern United States, as well as in Canada and South America.

Paper industry; Logs; Hoisting machinery;

Interior of St. Regis plant. The kraft and pulp mill in Jacksonville, Florida, started production in January, 1953. Corrugating and liner boards were part of its output. Skilled workers were needed to run and maintain the equipment; an employee is photographed in July, 1953, possibly oiling a piece of machinery. Huge cylinder-shaped structures, possibly holding tanks, surround the worker. Photograph ordered by Stebbins Engineering & Manufacturing Co.

St. Regis Paper Co. (Jacksonville, Fl.)--1950-1960; Industrial facilities--Jacksonville--1950-1960;

ca. 1953. An immense pile of logs, many feet higher than the sturdy Chevrolet and Ford trucks beside it, remains to be loaded for delivery to the Jacksonville, Florida, St. Regis Paper Co. plant in 1953. Workers have begun to stack the logs on truck beds. Unlike the Tacoma plant who utilized log dumps in the Milwaukee Waterway, the Florida plant apparently utilized a pulpwood storage yard at its new kraft mill. The barking plant handled up to 650 cords per day of pine logs from Florida and Georgia; these cords would be consumed by the mill in producing 300-400 tons of kraft paper or boards per day. (1953 St. Regis Annual Report, p. 11)

St. Regis Paper Co. (Jacksonville, Fl.)--1950-1960; Paper industry--Jacksonville--1950-1960; Logs; Chevrolet trucks; Ford trucks;

Interior view of St. Regis. This photograph, taken on July 3, 1953, is probably the interior of the Tacoma St. Regis plant. Production in the pulp and paper industry, of which St. Regis was a major player, hit a new high of over 26 million tons of paper and paperboard during 1953. St. Regis' mills and plants nationwide operated at or near full capacity. Sales increased 10% over 1952. Photograph ordered by Ederer Engineering Co. of Seattle, manufacturers of cranes and hoisting machinery. One of their cranes is apparently being readied to be utilized in moving large roll of possibly kraft paper. (1953 St. Regis Annual Report, p. 3)

St. Regis Paper Co. (Tacoma)--1950-1960; Paper industry--Tacoma--1950-1960; Industrial facilities--Tacoma--1950-1960; Hoisting machinery; Ederer Engineering Co. (Seattle);

A shirtless St. Regis Paper Co. employee clenches his gloved fists around the link belts dangling from the Yale Spur Geared Block while his co-worker stands to the rear keeping an eye on the chains. Although the men are wearing gloves and possibly steel-toed shoes, no other safety equipment appears present. Photograph was ordered by Yale & Towne Mfg. Co. and taken on June 27, 1953.

St. Regis Paper Co.; Hoisting machinery; Chains;

A Link Belt unit on wheels with Yale Spur Geared Block is being maneuvered by two employees of St. Regis Paper Co. on June 27, 1953. Each is holding onto the chains that suspend the long roller. Photograph ordered by Yale & Towne Mfg. Co.

St. Regis Paper Co.; Hoisting machinery; Chains;