Laborer interacting with machinery at the Fischer & Porter Co. West Tacoma Newsprint Co. in Steilacoom, WA.

Riegel Carolina Paper & Pulp Mill looking out on the docks on a ship named Mogul with a striped and lettered G figure.

Riegel Carolina Paper & Pulp Mill looking out on the docks on a ship named Mogul with a striped and lettered G figure.

Large pipe and smokestack at the Riegel Carolina Paper & Pulp Mill.

Man in a red baseball cap engaging with machinery at the Riegel Carolina Paper & Pulp Mill.

Fischer & Porter Co. West Tacoma Newsprint Co. in Steilacoom, WA.

Fischer & Porter Co. West Tacoma Newsprint Co. in Steilacoom, WA. Man taking notes on a clipboard reading various circular gauges attached to large machines.

Person pointing at an electrical box with various gauges at the West Tacoma Newsprint Co. in Steilacoom, WA.

St. Regis Paper Company (Kraft Pulp Division) showing an overaged destroyer that was to be sunk to provide a breakwater. Scuttling of the warship hulk commenced on Thursday, September 19, 1940. St. Regis took over the Union Paper company in 1936. Logs litter the waterway in the foreground. (T.Times)

Paper industry--Tacoma--1940-1950; St. Regis Paper Co. (Tacoma)--1940-1950; Scuttling of warships--United States;

Interior views of the St. Regis Paper Company where pulp is being dried further (steam is coming off as the pulp goes through the roller at the rear) and looks more like paper. St. Regis Paper Company, a national company, had seven mills throughout the country and also had extensive timber holdings in the Pacific Northwest and in other locations in the United States. On spec. for the Times, Labor Day. TPL-3765

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Machinery;

Progress photographs at St. Regis, St. Regis Paper Company, Kraft Pulp Division. An elevated view of the new construction going on at St. Regis that expanded the existing paper plant and added a multiwall bag plant. According to the company's 1949 Annual Report, Tacoma was the focal point of the company's expanding pulp, paper and multiwall bag operations in the west.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Factories--Tacoma--1940-1950;

The completion of the kraft paper mill in Tacoma, allowed St. Regis a considerable increase in the paper production industry. Interior view of St. Regis plant, view of Jones Majestic machinery; photo ordered by E. D. Jones and Sons Company, machinery and equipment manufacturers based out of Pittsfield, Massachusetts.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; E.D. Jones & Sons Co. (Tacoma);

The completion of the expansion project in Tacoma, have made this plant the focal point for St. Regis' expanding pulp, paper and multiwall bag operations in the West. Interior view of St. Regis plant, view of Jones Majestic machinery; photo ordered by E. D. Jones and Sons Company, machinery and equipment manufacturers based out of Pittsfield, Massachusetts.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; E.D. Jones & Sons Co. (Tacoma);

St. Regis' expansion project started after World war II ended in 1945, the company was able to begin paper production in Tacoma in January 1949. Interior view of St. Regis and paper producing machinery; photo ordered by Pusey & Jones Corporation, a machinery manufacturer from Wilmington, Delaware.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Pusey & Jones Corp. (Tacoma);

Interior view of St. Regis, view of the new high speed kraft paper machine, this machine is designed to operate at 2,000 feet per minute and produce paper nearly fourteen feet wide; this machine has been operating since January 5, 1949. Photo ordered by Pusey & Jones Corporation, a machinery manufacturer from Wilmington, Delaware.

Paper industry--Tacoma--1940-1950; Mechanical systems--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Pusey & Jones Corp. (Tacoma);

St. Regis had been expanding their facilities for many years, the company had added new buildings and was ready to begin the mass production of paper in Tacoma. View of new high speed kraft paper machine, this equipment is used in the "wet end" of paper production. Photo ordered by Pusey & Jones Corporation, a machinery manufacturer from Wilmington, Delaware.

Paper industry--Tacoma--1940-1950; Mechanical systems--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Pusey & Jones Corp. (Tacoma);

St. Regis' first mill was located at Deferiet, New York, this mill has been kept modern and enlarged in order to ensure high levels of productivity. Interior view of St. Regis in Tacoma and paper producing machinery; photo ordered by Pusey & Jones Corporation, a machinery manufacturer from Wilmington, Delaware.

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Mechanical systems--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Pusey & Jones Corp. (Tacoma);

Interior view of St. Regis; view of Tacoma mill's new high speed kraft paper machine, it is designed to operate at 2,000 feet per minute and produce paper nearly fourteen feet wide, unidentified man is standing by the machine. Photo ordered by Pusey & Jones Corporation, a machinery manufacturer from Wilmington, Delaware.

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Mechanical systems--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Pusey & Jones Corp. (Tacoma);

Two workers are pictured unloading a roll of Kraft paper to join others already stored in St. Regis' paper storage room. St. Regis had began producing paper in January of 1949 as it used the most modern equipment available at the time to convert liquid pulp into heavy multiwall Kraft paper. The plant was able to produce about 240 tons of multiwall bag paper per day.

Paper industry--Tacoma--1940-1950; Paper; Hoisting machinery; Machinery; Equipment; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

Western Gear at St. Regis plant. A view of two large pieces of machinery used in paper manufacturing at the new Kraft paper plant of St. Regis manufactured by Pusey-Jones Corporation, Wilmington, Delaware.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Machinery;

Progress photograph of steelwork at St. Regis Paper Company. The new multiwall bag plant, adjoining the paper mill, was to replace a leased plant at Seattle. The plant was expected to be in operation before April 1, 1952. It would employ approximately 400 people, including a large percentage of women. (St. Regis Annual Report 1951)

Paper industry--Tacoma--1950-1960; Progress photographs; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1950-1960; Building construction--Tacoma--1950-1960;

St. Regis was established in Tacoma in 1928, the New York firm purchased this industrial site, modernized it and began operations in 1936. St. Regis Paper Company is said to be the most modern pulp mill ever built. The Tacoma facilities are spread out over 65 acres, between the Puyallup River Waterway and the St. Paul Lumber Company. Aerial view of St. Regis Paper Company, construction in progress.

Paper industry--Tacoma--1940-1950; Mills--Tacoma; Industrial facilities--Tacoma; Progress photographs; Aerial photographs; St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis had been expanding their facilities for many years, the company had added new buildings and had recently begun the mass production of paper in Tacoma. St. Regis began producing paper in January 1949; the paper mill was converting the liquid pulp into heavy multiwall Kraft paper, using the most modern equipment available. Interior view of plant and new roll grinding machine.

Paper industry--Tacoma--1940-1950; Mechanical systems--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis paper plant in Tacoma is the focal point of the company's expanding pulp, paper and multiwall bag operations in the West Coast. The paper mill was recently completed and is one of the largest and most modern plants in the United States. The new paper producing mill is now able to mass produce paper and offer their customers their quality product in higher volumes and lower prices. Workmen are using an "Ederer" crane to move an enormous roll of paper.

Paper--Tacoma; Paper industry--Tacoma--1940-1950; Laborers--Tacoma; Hoisting machinery; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Ederer Engineering Co. (Seattle);

One of the employees at St. Regis Paper Company records information from a printout at one of the machines in the plant. Ordered by McGraw Hill Publishing Co., Inc., New York, NY.

St. Regis Paper Co. (Tacoma)--People; Paper industry--Tacoma--1940-1950;

An aerial view of the new multiwall bag plant at St. Regis. The plant was completely equipped to produce a full range of multiwall bags. Equipment included six production lines, three printing presses, a complete art and engraving department and auxiliary equipment. This plant replaced a leased plant in Seattle. (TNT, 10/19/1952)

St. Regis Paper Co. (Tacoma)--1950-1960; Aerial photographs; Mills--Tacoma--1950-1960; Paper industry--Tacoma--1950-1960;

An aerial view on February 16, 1952, showing the new multiwall bag plant at St. Regis. St. Regis also had other bag plants on the Pacific Coast at Los Angeles and San Leandro, California. The company also maintained complete engineering and service facilities for automatic bag filling equipment, including a machine shop at Los Angeles, and packer sales and engineering offices at San Francisco and Seattle. The company was self-contained on the west coast. (TNT, 10/19/1952)

St. Regis Paper Co. (Tacoma)--1950-1960; Aerial photographs; Mills--Tacoma--1950-1960; Paper industry--Tacoma--1950-1960;

An aerial view of the new multiwall bag plant at St. Regis. The expansion of the bag plant facilities by St. Regis reflected the continuing trend of industry and agriculture to use the multiwall shipping sack. It was estimated that approximately 2 1/2 billion multiwall bags were used in 1951 for all types of products, compared with less than half a billion in 1938. The multiwall bag came into general use as an industrial container in the mid 1920's and was used for packaging cement and other rock products. Shortly thereafter is was adopted by the sugar industry. (TNT, 10/19/1952)

St. Regis Paper Co. (Tacoma)--1950-1960; Aerial photographs; Mills--Tacoma--1950-1960; Paper industry--Tacoma--1950-1960;

St. Regis Paper Company. Construction progress. New bag plant. Interior of warehouse. Machinery, boxes, scaffolding, exposed mechanical system on ceiling. This is possibly the big bag plant at 801 Portland Ave. which was part of St. Regis' expansion in the 1950s.

St. Regis Paper Co. (Tacoma)--1950-1960; Building construction--Tacoma--1950-1960; Paper industry--Tacoma--1950-1960;

Another machine, a large roller type machine, is used to strip bark from logs at the St. Regis Paper plant. At the end of 1951, St. Regis reached a point where it was able to supply from its own operations virtually all of the sulphate pulp requirements, both bleached and unbleached, of its kraft paper mills. St. Regis had been experimenting at its Tacoma mill in manufacturing kraft pulp from clean waste wood chips and in 1951 was making use of this material on a considerable scale in production. (St. Regis Paper Co. 1951 Annual Report)

Paper industry--Tacoma--1950-1960; Mechanical systems--Tacoma; Machinery; St. Regis Paper Co. (Tacoma)--1950-1960;