Print preview Close

Showing 115 results

Collections
Richards Studio Photographs Industries -- Lumber -- Douglas Fir Plywood Association Image
Advanced search options
Print preview View:

115 results with digital objects Show results with digital objects

A4001-2

Interior view of Coast Sash & Door Company showing men building church windows. Coast Sash & Door had been in business on the Tideflats since 1924. Photograph ordered by the Plywood Association. (filed with Argentum)


Plywood; Douglas Fir Plywood Association (Tacoma); Coast Sash & Door Co. (Tacoma); Windows;

A4002-1

ca. 1937. Worker photographed applying adhesive and laying a plywood subfloor at an unidentified location, circa 1937. (filed with Argentum)


Plywood; Douglas Fir Plywood Association (Tacoma);

D19605-1

Clark residence, interior for D.F.P.A. A workman completes sanding the joint between two sheets of plywood on an interior wall. Plywood was used in home construction for its insulative qualities on both ceilings and walls. The Douglas Fir Plywood Association, headquartered in Tacoma, represented the entire fir plywood industry and promoted plywood nationally. (T.Times, 1/9/1946)


Plywood; Douglas Fir Plywood Association (Tacoma);

A25748-2

In February of 1947, the Tacoma Ice Palace at 3801 South Union Avenue was being prepared for a boxing bout. Plywood flooring was placed over the Ice Palace's skating rink. A boxing ring and a heating system with 12 large blowers was brought in. The main event, organized by Raleigh Sliger, was between the Canadian welterweight Hal Robbins and Chuck "Kid" Brown from Klamath Falls, Oregon. View of plywood floor being placed over Tacoma Ice Palace's skating rink, photo ordered by Douglas Fir Plywood Association. (T. Times, 2/10/47, p. 10).


Plywood; Douglas Fir Plywood Association (Tacoma); Floors--Tacoma; Ice skating rinks--Tacoma; Tacoma Ice Palace (Tacoma); Boxing--Tacoma;

D28210-20

Douglas Fir Plywood Association. Four men stand by one of the displays at the one-day convention of the Douglas Fir Plywood Association showing some of the post-war requirements of the plywood industry. Among the displays at the convention were samples made by the Plywood Research Foundation showing new uses and new products from plywood. (T.Times, 6/11/1947, p.1)


Douglas Fir Plywood Association (Tacoma); Lumber industry--Tacoma--1940-1950; Meetings--Tacoma--1940-1950;

D28210-9

Douglas Fir Plywood Association. Two men stand by a display for K-Veneer and its uses. Numerous new plywood products were exhibited such as surfacings for panels and combination products, some manufactured from sawdust and other substances previously considered waste. (T.Times, 6/11/1947, p.1)


Douglas Fir Plywood Association (Tacoma); Lumber industry--Tacoma--1940-1950; Meetings--Tacoma--1940-1950;

D28210-7

Douglas Fir Plywood Association. Four men stand by one of the display boards at the DFPA conference referring to the advertising done by the association on behalf of the plywood industry. All 33 of the Douglas Fir plywood factories in the western parts of Oregon and Washington were then participants in the plywood industry's quality control program. (T.Times, 6/11/1947, p.1)


Douglas Fir Plywood Association (Tacoma); Lumber industry--Tacoma--1940-1950; Meetings--Tacoma--1940-1950;

D28210-6

Douglas Fir Plywood Association. Four men have gathered to look at a display board of process samples at the one-day conference of the Douglas Fir Plywood Association held June 10, 1946, at the Elks Temple auditorium. Some 150 leaders of the plywood industry were assembled at this conference. (T.Times, 6/11/1947, p.1)


Douglas Fir Plywood Association (Tacoma); Lumber industry--Tacoma--1940-1950; Meetings--Tacoma--1940-1950;

D31129-4

ca. 1947. Plywood testing, ordered by the Douglas Fir Plywood Association. The plywood industry was one of the most rigorously self regulated businesses in America. Its own labs were constantly testing its product, plywood, for new uses and limitations. All of the testing, promotion and self regulation were performed under the banner of the Douglas Fir Plywood Association. Here plywood is being tested at extremely high temperatures, also under what appears to be a weight. Wires lead from sensors to meters being monitored by the tester.


Douglas Fir Plywood Association (Tacoma); Plywood; Experiments; Product inspection;

D32206-7

Installation of sheathing at home of Joe Weston, Douglas Fir Plywood Association, Edith Link. A view in March of 1948 of the exterior of Joseph and Carol Weston's residence where a new addition is being added to the existing structure. Joe was a supervisor at DFPA. Douglas Fir Plywood Association was eager to show the potential uses of plywood.


Douglas Fir Plywood Association (Tacoma); Lumber industry--Tacoma--1940-1950; Construction--Tacoma--1940-1950; Weston, Joseph--Homes & haunts; Dwellings--Tacoma--1940-1950;

D32369-3

DFPA. "Another Custom Built Home by Harry R. May", progress photograph (D32206-7). Joseph and Carol Weston began this addition to their residence in March of 1948. The basic structure has been completed, the chimneys added, the roof is nearing completion and the sides are enclosed by plywood. One exterior wall is being finished with a large bank of windows.


Douglas Fir Plywood Association (Tacoma); Lumber industry--Tacoma--1940-1950; Construction--Tacoma--1940-1950; Weston, Joseph--Homes & haunts; Dwellings--Tacoma--1940-1950; Progress photographs;

D32642-4

Great Northern Box Car being loaded by Sperry Flour Company at Ocean Dock, DFPA, Edith Leik. A view inside the box car. Bags of flour are being moved by a forklift to fill the upper spaces in the box car. The interior of the freight car is lined with plywood and paper to protect the flour and meal being shipped. TPL-10457


Douglas Fir Plywood Association (Tacoma); Great Northern Railway Co. (Tacoma); General Mills, Inc., Sperry Division (Tacoma); Railroad freight cars--Tacoma; Railroad tracks--Tacoma; Flour & meal industry--Tacoma; Hoisting machinery;

D35570-8

Douglas Fir Plywood Association. A view of a construction site using plywood forms for the reinforced concrete exterior walls for the new gymnasium nearing completion at the College of Puget Sound. It is being built by the Roy T. Early Company, contractors. Mock & Morrison were the architects. Several workmen are seen both on the ground and above the top of the wall securing the plywood forms. (T.Times, 1/2/1949, p.34)


Douglas Fir Plywood Association (Tacoma); Construction--Tacoma--1940-1950; Reinforced concrete construction--Tacoma--1940-1950; Progress photographs; College of Puget Sound (Tacoma)--1940-1950; Gymnasiums--Tacoma;

A42435-2

The Plywood Research Foundation was supported by all fir plywood manufacturers and devoted to the development of new products that could be manufactured from parts of the tree not already being utilized. View of plywood products being tested and tool being used for testing at the Plywood Research Foundation.


Plywood Research Foundation (Tacoma); Douglas Fir Plywood Association (Tacoma)--Products; Plywood; Lumber industry--Tacoma--1940-1950; Laboratories--Tacoma--1940-1950; Product inspection--Tacoma; Testing--Tacoma--1940-1950;

D43146-2

Roadside fireworks stand, DFPA, Hal Dixon. Two men are erecting a temporary stand for selling fireworks in June of 1949. The walls are made of sheets of plywood. A small, permanent structure is behind them with large signs advertising wholesale fireworks, Zebra and Boa brands. Ordered by Douglas Fir Plywood Association.


Douglas Fir Plywood Association (Tacoma); Fireworks--Tacoma--1940-1950; Plywood; Construction--Tacoma--1940-1950;

D43144-3

Use of plywood in new Washington Hardware Wholesale Building, DFPA, Hal Dixon. The building, made of reinforced concrete, was designed by Lance, McGuire and Muri, Architects. Norman Strom was the contractor of the 210 foot by 211 foot, 50,000 square foot, building.


Douglas Fir Plywood Association (Tacoma); Reinforced concrete construction--Tacoma--1940-1950;

D43404-4

DFPA. A workman is laying a plywood sub-floor at what is believed to be the Devlin home. The walls have been covered with plywood as well. An edge of a brick fireplace is seen on the right. Large floor-to-ceiling windows are seen on the left. The beams are left open on the ceiling. The home was being restored after purchase earlier in 1949.


Douglas Fir Plywood Association (Tacoma); Plywood; Devlin, Charles E.--Homes & haunts; Floors--Lakewood--1940-1950;

A55341-3

Two students play ping-pong in the Chapter Room at Kappa Sigma House. The walls have been covered with knotty-pine paneling. This fraternity became the first at the College of Puget Sound to employ a permanent house mother in 1950. Ordered by Douglas Fir Plywood Association, Tom Sias.


Douglas Fir Plywood Association (Tacoma); Table tennis--Tacoma; Students--Tacoma--1950-1960; Fraternities & sororities--Tacoma--1950-1960; College of Puget Sound (Tacoma)--1950-1960; Kappa Sigma (Tacoma);

D47869-3

Calf shelter made of plywood at Western Washington Experiment Station. The Station, created in 1893, was located approximately seven miles from the city of Tacoma, in the Puyallup Valley. The Station engaged in research on western Washington agricultural problems. Photograph ordered by Douglas Fir Plywood Association.


Plywood; Douglas Fir Plywood Association (Tacoma); Western Washington Experiment Station (Puyallup); Barns--Tacoma

D47869-5

Calf shelter made of plywood at Western Washington Experiment Station. The Station, affiliated with Washington State College, opened 7/1/1895. Its approximately 155 home acres were used to develop satisfactory farm practices in the fields of dairying, poultry production, and the growth of fruits, vegetables, specialty crops, ornamentals and bulbs. It employed approximately 70 people from the Tacoma/Puyallup area, 20 of those in research. Photograph ordered by Douglas Fir Plywood Association.


Plywood; Douglas Fir Plywood Association (Tacoma); Barns--Tacoma; Western Washington Experiment Station (Puyallup);

D48554-2

Grosvenor House apartments, 500 No. Wall, Seattle, under construction. Photo for Douglas Fir Plywood Association. Photograph was taken on March 5, 1950.


Douglas Fir Plywood Association (Tacoma); Grosvenor House Apartments (Seattle); Construction--Seattle; Apartment houses--Seattle; Progress photographs--1950-1960;

D49277-1

Frozen food lockers were manufactured by St. Paul and Tacoma Lumber Company at Coast Sash and Door Company using plaster-faced plywood. A workman inspects the fit of the door in its sash. Coast Sash and Door opened at this location on the Tacoma tideflats in 1924. Ordered by Douglas Fir Plywood Association, John Ritchie.


Plywood; Douglas Fir Plywood Association (Tacoma); Coast Sash & Door Co. (Tacoma); St. Paul & Tacoma Lumber Co. (Tacoma); Doors & doorways--Tacoma; Lumber industry--Tacoma--1950-1960;

D49774-1

The trucks advertise the company's fur service. The trucks are painted in two tones, light colored bodies with darker fenders. Ordered by Douglas Fir Plywood Association, Hal Dixon.


Plywood; Douglas Fir Plywood Association (Tacoma); Trucks--Tacoma--1950-1960; Dodge trucks; Cleaning establishments--Tacoma;

D49897-2

Progress photograph at the Narrows Bridge construction site showing prefab of plywood forms. The Tacoma Narrows Bridge was the third longest suspension span in the world at the time it was built. Both towers of the bridge are seen in the background. Until the full weight of the deck was in place the tops of the two towers leaned about 3 feet toward the shore. Ordered by Douglas Fir Plywood Association. (TNT, 5/28/1950, p.1)


Plywood; Douglas Fir Plywood Association (Tacoma); Plywood; Bridges--Tacoma; Progress photographs; Tacoma Narrows Bridge (Tacoma);

D49888-1

Annual convention of Douglas Fir Plywood Association at the Winthrop Hotel. Four unidentified men stand in front of charts with production numbers. Ordered by Mr. McCallum.


Douglas Fir Plywood Association (Tacoma); Hotel Winthrop (Tacoma); Meetings--Tacoma--1950-1960;

D49691-7

Nelson S. Perkins, of the Douglas Fir Plywood Association. In the late forties, Perkins, then a young brilliant civil engineer, was hired to head up the DFPA'S technical and engineering department. This was a position that he would hold for many years. In 1959, he was promoted to a liason position between the member mills and the DFPA. (" The Plywood Age" by Robert M. Cour, TNT 3/18/1959, pg. A-14)


Douglas Fir Plywood Association (Tacoma); Plywood; Perkins, Nelson;

D50890-1

Two men are constructing a silo by nailing sheets of plywood to an exterior form built with a circular shape cut from plywood and 2 x 4 lumber. Ordered by Douglas Fir Plywood Association.


Plywood; Douglas Fir Plywood Association (Tacoma); Silos--Tacoma;

D53817-1

Cold room constuction, Douglas Fir Plywood Association laboratory, Dave Countryman. Worker installing plywood panels on walls of foil insulated room on October 31, 1950.


Plywood; Douglas Fir Plywood Association (Tacoma);

D53817-11

Cold room constuction, Douglas Fir Plywood Association laboratory, Dave Countryman. Worker installing plywood panels on walls of foil insulated room on Halloween, 1950.


Plywood; Douglas Fir Plywood Association (Tacoma);

D58412-17

A workman is fitting doors into a large cabinet built using plywood. Ordered by Douglas Fir Plywood Association.


Plywood; Douglas Fir Plywood Association (Tacoma);

Results 1 to 30 of 115