ca. 1946. The unveiling of the giant cross section of a tree trunk at the Northwest Door Company. The Northwest Door Co. plywood and veneer plant was founded in 1935. In the summer of 1946, the company logged a gigantic old growth Douglas Fir on their logging property southwest of Mt. Rainier. The tree was almost 14 feet in diameter. A cross section of the trunk was removed and sent to the Tacoma plant for display. Here the section is covered by a curtain prior to its unveiling. The cross section of fir was moved in 1965 to the Lakewood branch of the Pierce County Library system. See image #3 for the unveiling.
Logs; Lumber industry--Tacoma--1940-1950; Northwest Door Co., Inc. (Tacoma); Tree stumps--Tacoma--1940-1950;
An elevated view of the Defiance Mill saw line for I.W. Johnson Engineering. The gang type saw mill the Doud brothers built in 1929 was particularly adapted to sawing smaller logs. The gang mill cut with greater precision and left the lumber much smoother. A person who ran a gang saw was called a "gangster".
Douglas Fir Plywood Association. A young girl looks up at the enormous log section. The annual rings show the tree was 586 years old. It would have provided much good lumber even before Columbus landed in America. Long over-ripe, rot had begun to appear just inside the bark at the base of the trunk and much of the upper part was decayed. (T.Times, 10/16/1946, p.4; TNT 8/21/1946, pg. 1)
Lumber industry--Tacoma--1940-1950; Logs; Girls--Tacoma--1940-1950; Northwest Door Co., Inc. (Tacoma); Tree stumps--Tacoma--1940-1950;
Rucker Brothers trucking company was owned by Burrell and Murrell Rucker, they were located on 733 East 11th Street, on the same site as the St. Paul and Tacoma Retail Lumberyard. View of Rucker Brothers truck loaded with lumber, St. Paul and Tacoma Lumberyard in background. St. Paul and Tacoma lumber was shipped throughout Washington in Rucker trucks.
Lumberyards--Tacoma; Lumber industry--Tacoma--1940-1950; Shipping--Tacoma; St. Paul & Tacoma Lumber Co. (Tacoma); Rucker Brothers (Tacoma); Trucks--Tacoma--1940-1950; International trucks;
Cheney Lumber Mills could be found throughout Washington, Oregon and California. The Tacoma plant had a sawmill, dry kiln, planning mill, log sorting area, storage facilities and loading areas. This plant employed approximately forty people. Exterior view of Cheney plant, laborers appear to be stacking and moving studs by using equipment.
Loading a shipment of lumber from Cheney Lumber Company was made easier by the Cheney's facilities and dock on Sitcum Waterway. Cranes could load directly from railroad cars that had tracks on the dock. TPL-5676
Cheney Lumber Co. was founded by Ben B. Cheney. Ben Cheney, although a well respected lumberman and a pioneer in his field, is also known for his interest in sports. The Cheney Stud teams participated in baseball, football, soccer and basketball. Ben Cheney was instrumental in bringing the Pacific Coast Baseball League to Tacoma and the Tacoma Cheney Stadium was named in his honor. A view of Cheney Lumber stacked on the dock ready for loading into a ship tied-up at the company dock.
Interiors at the Buffelen Lumber plant on the Tideflats. The immense plant was located on Lincoln Ave at Taylor Way. It was one of the earliest producers of fir plywood; beginning plywood production in 1916. In this photograph, two employees, one of them a woman wearing slacks, stack sheets of plywood. Plywood was an important World War II material, used in boats as well as buildings. During and after WWII, it was used for pre-fab housing. ("The Plywood Age" Robert M. Cour)
Cheney Lumber Company. Large logs felled by the Cheney Lumber Company dwarf the man standing on a bulldozer and another standing on top of one of the logs. Lesser trees are still standing in the now bleak landscape.
Douglas Fir Plywood Association. Testing plywood for resistance to pressure. One worker manipulates the machinery while another keeps record of the test results. Severs laboratory tests to which fir plywood was constantly subjected assured consumers of consistent high-quality materials. The standards not only set forth grades and types but also consistent testing procedures. (T.Times, 2/25/1949)
Plywood Research Foundation (Tacoma); Plywood; Lumber industry--Tacoma--1940-1950; Laboratories--Tacoma--1940-1950;
Douglas Fir Plywood Association. Testing plywood at the plywood lab. One of the standards demanded that the adhesives, after setting, be stronger than the wood. The research projects were not only intended to answer today's questions but also future applications. Other studies included industrial and agricultural applications. (TNT, 2/17/1948, p.3-B)
Plywood Research Foundation (Tacoma); Plywood; Lumber industry--Tacoma--1940-1950; Laboratories--Tacoma--1940-1950;
Kulien & Wollander home in Lakeside project for D.F.P.A. Plywood was used for both interior and exterior residential purposes. It was used for prefabricated housing for war workers. Plywood was known for its strength and flexibility in construction. It was often used for concrete molds. (TNT, 2/1942)
Plywood; Kulien & Wollander Co. (Lakewood); Douglas Fir Plywood Association (Tacoma); Houses--1940-1950;
St. Paul & Tacoma Lumber Co. had three logging camps located near Tacoma. St. Paul and Tacoma lumber company provides enough lumber and plywood to build 48 homes per day. They were one of the largest lumber companies in the Pacific Northwest. View of cleared land near one of the logging camps.
Lumber industry--Tacoma--1940-1950; Cutover lands; Logs; St. Paul & Tacoma Lumber Co. (Tacoma);
A. H. Cox & Co. at St. Paul & Tacoma Lumber Co. logging operation at Puyallup. St. Paul & Tacoma Lumber has invested extra sums of money on researching preventative measures for protecting forests from fires and wildlife. View of high line duplex skidder and loader. This machine requires a crew of 14 men and has the capacity of 15 cars of logs in an 8 hour period. TPL-6378
Lumber industry--Tacoma--1940-1950; Machinery; Woodcutting--Puyallup; St. Paul & Tacoma Lumber Co. (Tacoma);
ca. 1946. A section of Douglas Fir tree trunk almost 14 feet in diameter arrives at the Northwest Door Co. plywood plant. Anthony A. "Spike" Maras perches on top of the trunk, which is marked with a white 14 and sits on a logging truck. The "14" is the measurement of the diameter of the tree. On the ground, Fred R. Davis, left, and Percy J. Maras crane their necks to see the top of the trunk. The men are the owners of the Davis & Maras Co., which was hired by Northwest Door to fell the tree. The giant trunk will not be made into plywood, but will be put on display. (identification supplied by Anthony "Spike" Maras)
Logs; Lumber industry--Tacoma--1940-1950; Northwest Door Co., Inc. (Tacoma); Tree stumps--Tacoma--1940-1950; Logging trucks--1940-1950; Maras, Anthony A.; Davis, Fred R.; Maras, Percy J.;
St. Paul & Tacoma Lumber Company. Railroad cars have brought logs to the log pond in this August of 1946 photograph. The railroad cars have false bottoms that can be lifted by the crane allowing the logs to plunge into the log pond.
Logs; Lumber industry--Tacoma--1940-1950; St. Paul & Tacoma Lumber Co. (Tacoma); Hoisting machinery;
A workman at the Northwest Door Company kneels on the top of a huge section of an old growth douglas fir. He is using a long buck saw to slice off a section from the piece of wood. This 12ft 9 inch diameter slice of trunk will be on display at the door company. The tree was cut on the company's holdings west of Packwood.
Lumber industry--Tacoma--1940-1950; Northwest Door Co., Inc. (Tacoma); Logs; Tree stumps--Tacoma--1940-1950;
Henry Mill was located at the foot of No. Starr St., right at the waterfront. It was on the 28 acre site of the old Tacoma MIll Co. During the war, Henry Mill specialized in prefabricated elements for the military. The company was taken over in 1945 by Tacoma Lumber Fabricating Co. The photograph shows lots of stored lumber as well as a couple of cranes.
Henry Mill and Timber Company. Burner and lumber storage dock along the Tacoma waterfront. Henry Mill began operations at this site in 1925. It was formerly the site of the Old Tacoma Mill Co. TPL-8381
Henry Mill shots of hardware and quantity. Henry Mill & Timber Co. was a leader in the pre-fabricated lumber field. Pre-fabricated lumber helped speed the war effort in filling their government orders. Henry Mill also had their products throughout Tacoma housing projects. Exterior view of Henry Mill & Timber Co. plant.
Ladd Logging Company. Several very large logs float in a log pond. In October 1948 Ladd Logging Company was known to have been cutting logs from the Kosmos section of east Lewis County along with other logging companies. The logs were brought to Tacoma's harbor dumps and storage spaces by rail. When needed they were rafted together and taken to saw or pulp mills. Large numbers of logs were cut and dumped in log ponds against the approaching winter slowdown in the woods. (T.Times, 2/26/1941; Ledger 11/10/1946)
Exterior of Wheeler Osgood Company's offices. Wheeler-Osgood was known as the world's largest manufacturer of doors and plywood at this time. The company started making doors in Tacoma in 1889 and plywood in 1910, only five years after the first fir plywood was manufactured at Portland, Oregon. N.O. Cruver served as president of the company at this time. He was president for 32 years.
ca. 1947. Plywood testing, ordered by the Douglas Fir Plywood Association. The plywood industry was one of the most rigorously self regulated businesses in America. Its own labs were constantly testing its product, plywood, for new uses and limitations. All of the testing, promotion and self regulation were performed under the banner of the Douglas Fir Plywood Association. Here plywood is being tested at extremely high temperatures, also under what appears to be a weight. Wires lead from sensors to meters being monitored by the tester.
Douglas Fir Plywood Association (Tacoma); Plywood; Experiments; Product inspection;
Great Northern Box Car being loaded by Sperry Flour Company at Ocean Dock, DFPA, Edith Leik. A view inside the box car. Bags of flour are being moved by a forklift to fill the upper spaces in the box car. The interior of the freight car is lined with plywood and paper to protect the flour and meal being shipped. TPL-10457
Douglas Fir Plywood Association (Tacoma); Great Northern Railway Co. (Tacoma); General Mills, Inc., Sperry Division (Tacoma); Railroad freight cars--Tacoma; Railroad tracks--Tacoma; Flour & meal industry--Tacoma; Hoisting machinery;
Several operations in plant, Tacoma Lumber Fabricating, Mr. Patterson. Young men work alongside older men in creating the structural beams for which Tacoma Lumber Fabricating was well known. The company created prefabricated portions of buildings for an entire prefabricated house as well as curved beams used to roof large buildings. The top floor of their modern office building was the plant loft for giant layout work. They had a complete sawmill and planing mill plant. (T.Times, 1/16/1949, p.18)
Tacoma Lumber Fabricating Co. (Tacoma); Lumber industry--Tacoma--1940-1950; Building materials industry--Tacoma--1940-1950;
Several operations in plant, Tacoma Lumber Fabricating, Mr. Patterson. Workmen are dipping completed trusses into a liquid mixture using a pulley system. Stacks of lumber are seen further back in the plant's yard. The company manufactured materials from heavy timbers such as power line cross arms, bridge timbers and roof trusses to little pieces four feet long for refrigerator car rack slabs. (T.Times, 1/16/1949, p.18)
Tacoma Lumber Fabricating Co. (Tacoma); Lumber industry--Tacoma--1940-1950; Building materials industry--Tacoma--1940-1950;
Wheeler Osgood was a leader in the lumber industry, they manufactured doors and plywood panels. The company has been doing business in Tacoma for many years, they are one of the oldest businesses in Tacoma. In 1947 Wheeler Osgood was considering expanding their facilities, no changes had yet started, although the exterior of plant had been painted in October of 1947. Exterior view of Wheeler Osgood Company facilities.
