Interior of Star Iron & Steel plant. Elevated view on May 1, 1963, of interior of the Star Iron & Steel plant shows fabricated steel products ready to be assembled. Star Iron, well-known for crane construction, also made towers, hydraulic presses, power operated grapples, and fabricated steel for buildings, bridges and grandstands. They had built a larger plant on Alexander Avenue in 1963.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970;

An enormous Brute Crane manufactured by the Star Iron & Steel Co. of Tacoma balances both men on board and heavy loads of plywood in this customer print copied in September, 1963. The presence of other piles of plywood near the building under construction seem to indicate that the Brute Crane has already been put to good use. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Hoisting machinery; Plywood; Building construction;

ca. 1971. 1971 Richards color stock footage. A familiar landmark in Tacoma was the imposing smokestack at the ASARCO smelter. It rose over 500 feet at the smelter located near Point Defiance. The smokestack, dubbed the tallest in the world at the time of its 1917 construction, would be demolished on January 17, 1993.

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1970-1980; Smokestacks--Tacoma; Industrial facilities--Tacoma;

Overhead view of trolley assembly at Star Iron & Steel. Trolley No. 1 and No. 2 are being assembled for the Webbers Fall Lock & Dam Crane on February 28, 1969. Photograph ordered by Star Iron & Steel.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Hoisting machinery;

A small convoy of trucks prepares to leave Star Iron & Steel, 326 Alexander Ave., loaded with manufactured products on March 13, 1968. Star Iron was well known for its crane production and other heavy duty equipment. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Trucks--Tacoma--1960-1970; Steel industry--Tacoma--1960-1970;

Crane under construction at Star Iron & Steel Co. The Star Iron & Steel plant was located in new quarters at 326 Alexander Ave. in the Port Industrial area. Custom designing and manufacturing special equipment, cranes, and hoists was its primary business. During July, 1964, gantry cranes weighing 50 and 350 tons were being manufactured by Star Iron & Steel. Gantry cranes were similar to overhead bridge cranes except that the bridge for carrying the trolly or trolleys was rigidly supported on two or more legs running on fixed rails or other runway. Photograph ordered by Star Iron & Steel.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970; Hoisting machinery;

Scenes from the steel industry. By 1969, Star Iron & Steel had been in their Port Industrial location for six years. The larger facility at 326 Alexander Ave. made it possible for the company to increase payroll and accept more jobs. One of the projects in February of 1969 was to build winch components for Everett Alumina Crane. Photograph ordered by Star Iron & Steel.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Hoisting machinery;

Scenes from Star Iron & Steel. Star Iron & Steel was one of the northwest's oldest steel fabricating firms. It was well known for the quality of its cranes, especially the heavy duty cranes manufactured for the Navy during WWII. In February of 1969, one of its projects was to manufacture winch components for the Everett Alumina Crane. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Hoisting machinery;

Star Iron & Steel operations. A Star Iron & Steel employee in overalls and gloves is shown operating an unidentified machine at the company plant in March of 1971. Star Iron & Steel was a longtime Tacoma firm with origins in the 1920s. Cranes, hoists and special machinery made up 70% of Star Iron & Steel's annual volume. The company also specialized in fabricated steel and aluminum. Photograph ordered by Star Iron & Steel. (TNT 12-13-70, C-21 - article)

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1970-1980; Machinery;

Workers are preparing to move a floating bulkhead in early February of 1971 from its construction site at 326 Alexander Ave. to the Port of Tacoma waterfront. It appears that rubber segments are being laid to help with traction. The bulkhead was manufactured by Star Iron & Steel Co. for the U.S. Corps of Engineers. It would be towed by tugboat down the coast and up the Columbia River to a dam on the Snake River. Photograph ordered by Star Iron & Steel Co. (TNT 2-6-71, p. 21- article)

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1970-1980; Retaining walls--Tacoma;

A worker makes one final check before the heavy-duty Northwest Hauling Co. truck departs from Star Iron & Steel's tideflats location on February 3, 1971, with a floating bulkhead in tow. After a stop at the Port of Tacoma, the bulkhead would be towed by tug to its final destination at the Little Goose Lock & Dam on the Snake River. Although Star Iron & Steel was perhaps best known for its manufacture of cranes and hoists, it also accepted other contracts; this $165,000 contract was from the U.S. Corps of Engineers. Photograph ordered by Star Iron & Steel Co. (TNT 2-6-71, p. 21- article)

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1970-1980; Retaining walls--Tacoma; Trucks--Tacoma--1970-1980;

ca. 1900. This is a copy of an early photograph of the Atlas Foundry & Machine Co., originally taken circa 1900. The copy was made in 1978. Atlas Foundry (since renamed Atlas Castings & Technology) was established in 1899 as a manufacturer of iron castings. Steel and brass were later added to its catalog of moldable metals. Its sprawling complex is still located between Center St. and South Tacoma Way.

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1900-1910;

Groundbreaking for Atlas Foundry's $5,000,000 expansion and modernization project occurred on February 23, 1978. Standing with his foot on a shovel is company president Leo H. Long, Sr. Among those attending the ceremony were Milo S. Gates and Chuck Fausel (flanking Mr. Long). Founded in 1899, the company is now known as Atlas Castings & Technology. Photograph ordered by Atlas Foundry. (TNT 2-24-78, C-12-article on expansion)

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1970-1980; Steel industry--Tacoma--1970-1980; Ground breaking ceremonies--Tacoma--1970-1980; Shovels;

ca. 1925. ASARCO smokestack and NP tracks coming out of the Nelson Bennett Tunnel to the west of Point Defiance Park. Photograph was taken circa 1925. BU-13881

ca. 1893. Tacoma smelter. This photograph of the Tacoma Smelting & Refining Co. (previously named the Ryan Smelter) was taken for the New England Magazine and published in their February, 1893, issue. The smelter was owned by prominent businessman William R. Rust who had purchased it four years before. The smelter was originally built to produce lead but in a few short years, would become a major supplier of copper. A comparison of an earlier view of the smelter, taken circa 1888, now shows a completed pier on the right and an additional large building on the property. In 1905 the American Smelting & Refining Co. (ASARCO) bought the company and it remained an important part of Tacoma's economy until its closure in 1985. (New England Magazine - February, 1893 p.800) (See Rutter, image 01, for view of smelter circa 1888)

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma; Industrial facilities--Tacoma;

Damaged negative showning view of American Smelting & Refining Co. (ASARCO) looking toward Tacoma.

Smelters--Tacoma; American Smelting & Refining Co. (Tacoma);

Steel plate girder manufactured by Star Iron & Steel for the Masonic Temple at 47 Saint Helens Ave, Tacoma.

Industries; Star Iron & Steel; Construction; Masonic Temple;

Pierce County Airport, Lakewiew (now Lakewood) Wa. Steel hangar designed and developed by Star Iron & Steel.

Industries; Star Iron & Steel; Airports; Construction;

Machinery at Star Iron & Steel foundry at 435 E 11th St, Tacoma

Industries; Star Iron & Steel; Machinery; Tideflats;

Fabrication and boring mill at Star Iron & Steel. Two men shown at work at Star Iron & Steel, 326 Alexander Ave. in the Port Industrial area, on August 8, 1966. They may have been working on "B" and "A" cranes. Photograph ordered by Star Iron & Steel.

Star Iron & Steel Co. (Tacoma); Industrial facilities--Tacoma--1960-1970; Steel industry--Tacoma--1960-1970; Hoisting machinery;

Conveyor system pictured at Port of Tacoma in January, 1967. Built by Star Iron & Steel of Tacoma, the elevated conveyor equipment is set up to load and unload materials to the domed storage tank in the background. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Conveying systems--Tacoma--1960-1970; Storage tanks--Tacoma;

Another view of the giant crane shown in D153667, Image 1. Cranes manufactured by Star Iron & Steel underwent rigorous testing before they were released to buyers. The Army Corps of Engineers required that the crane be fully assembled and operable before delivery. Once performance testing was completed, the crane would be dismantled and shipped. This 100-ton crane was destined for work on the Snake River at the Little Goose Lock & Dam. Similar cranes were built by Star Iron & Steel for usage on the Hoover, Mossyrock, Mayfield, Grand Coulee, Shasta and Bonneville dams. Photograph ordered by Star Iron & Steel Co. (TNT 3-17-68, C-21)

Star Iron & Steel Co. (Tacoma); Hoisting machinery; Steel industry--Tacoma--1960-1970;

Scenes from the steel industry. View of crane work at Star Iron & Steel Co. Star Iron & Steel was one of the northwest's oldest fabricating companies. In February of 1969, the company was involved in manufacturing winch components for the Everett Alumina Crane. This crane may have been eventually used by the Port of Everett to move alumina ore, one of the port's chief imports. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Hoisting machinery;

An elevated view of the huge crane being built at Star Iron and Steel Company shows the opening in the crane over which the upper trolly can move. Enormous rolls of cable on top of the crane would be used to lift heavy materials vertically and the trolly could transfer the material horizontally.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1940-1950; Hoisting machinery; Factories--Tacoma--1940-1950;

A huge crane is being built at Star Iron and Steel Company to be installed from the roof of a welding shack. The Star Iron and Steel Company manufactured heavy cranes and logging machinery. They made some of the largest and heaviest cranes used by the US navy and industry. Roy N. Allen was president and manager of the company at this time.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1940-1950; Hoisting machinery; Factories--Tacoma--1940-1950;

Star Iron & Steel - complete engineering, structural shop and machine shop facilities. Notes from the Richards Studio indicate that their photographer took this April 13, 1963, view of the new Star Iron & Steel Co. facilities from one of the company's own overhead cranes. Several cranes and steel structures are visible as well as the waterways separating the industrial Tideflats area from downtown businesses. Star Iron had moved from its longtime E. 11th St. location to the Port Industrial area that year. The new plant was ideally located for shipment of its products by truck, rail or water. Employment at the plant had apparently more than tripled from 63 to 250 since the move to a new location. It had cost $500,000 to double the plant capacity. Star Iron & Steel was one of the oldest steel fabricating businesses in the Pacific Northwest, having been founded in 1908. It specialized in custom design and manufacture of cranes, hoists, and special machinery. Star Iron's products were shipped for installation throughout the United States and also to foreign countries. There was a total of 97,000 square feet under roof currently being used with another 54,000 square feet available for future expansion. (TNT 7-24-63, A-11; SIS booklet, c. 1965)

Star Iron & Steel Co. (Tacoma); Industrial facilities--Tacoma--1960-1970; Steel industry--Tacoma--1960-1970; Hoisting machinery;

Pencil in hand, an architect at Star Iron & Steel Co. surveys a model of a steel sign and girts on April 9, 1963. His glasses rest on a large sheet holding design data. Besides being well-known for their hoisting machinery, Star Iron also built towers, fabricated structural steel for buildings, bridges, and grandstands, and equipment for the lumber industry. They moved from their longtime location on E. 11th St. to Alexander Avenue in the Port Industrial area in 1963. Photograph ordered by Bethlehem Pacific Coast Steel.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Architectural models; Blueprints; Eyeglasses;

Part of a series of photographs of a 275-ton powerhouse crane constructed by Star Iron & Steel Co. of Tacoma for the Barkley Power Plant on the Cumberland River. This July 15, 1963, view is described as the general arrangement and trolley with main and auxiliary hoists.

Star Iron & Steel Co. (Tacoma);

Bushnell Co. of Jacksonville, Florida, supplied crane service to this tower under construction at an unspecified harbor in this undated photograph. Customer print was copied on September 17, 1963, for Star Iron & Steel Co. of Tacoma.

Star Iron & Steel Co. (Tacoma); Hoisting machinery;

A "Porta Tower" built by Star Iron & Steel extends at a 45 degree angle in a September 19, 1963, photograph taken outside company headquarters. Porta Towers were described as mobile steel spur trees that replaced spar trees in logging operations. A "Porta Tower" could be erected and ready to work in two hours, much less time than it would take to rig a spar tree. Photograph ordered by Star Iron & Steel. (TNT 10-13-63, B-9)

Star Iron & Steel Co. (Tacoma); Steel;