American Smelting and Refining Company (ASARCO), Tacoma. Worker grasping tongs as he reaches into small, industrial oven. For J. Gius, reporter.

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1930-1940; Copper industry--Tacoma--1930-1940; Industrial facilities--Tacoma;

Tacoma Smelter. Once the tallest smoke stack in the world, the brick structure billows smoke as it looms far above the refinery's steel gates. The stack was imploded in the 1990s after the refinery closed. Unchanged, the traffic tunnel remains in use.

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1930-1940; Copper industry--Tacoma--1930-1940; Industrial facilities--Tacoma;

Aerial view of American Smelting & Refining Co.'s (ASARCO) smokestack, smelter plant and surrounding area. ASARCO occupied a large area near Point Defiance and contributed greatly to Tacoma's economy in the fifties. As we know now, the by products of the smelting process were highly toxic, and qualified this area as a Superfund clean up area. TPL-9290

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1950-1960; Copper industry--Tacoma--1950-1960;

Waste - heat boilers at Tacoma Smelter - mass of pipe within steel frame at angle. (filed with Argentum)

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1930-1940; Copper industry--Tacoma--1930-1940; Industrial facilities--Tacoma;

Waste-heat boilers at Tacoma Smelter (ASARCO) showing pipes within frame work, some pipes continue to floor below. (filed with Argentum)

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1930-1940; Copper industry--Tacoma--1930-1940; Industrial facilities--Tacoma;

Waste - heat boilers at Tacoma Smelter - mass of pipe within steel frame at angle. (filed with Argentum)

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1930-1940; Copper industry--Tacoma--1930-1940; Industrial facilities--Tacoma;

ca. 1961. Scenic view and stock footage, 1961. Smoke billowing, the American Smelting & Refining Co. (better known as ASARCO)'s smokestack was once the largest smokestack in the world at 571 feet when completed in 1917. Repairs shortened it to 562 feet twenty years later. ASARCO was a major employer in Tacoma for decades; it closed in 1985 due to economic and environmental reasons. The smelter stack was demolished on January 17, 1993.

Aerial photographs; American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1960-1970; Smokestacks--Tacoma; Industrial facilities--Tacoma;

ca. 1893. Tacoma smelter. This photograph of the Tacoma Smelting & Refining Co. (previously named the Ryan Smelter) was taken for the New England Magazine and published in their February, 1893, issue. The smelter was owned by prominent businessman William R. Rust who had purchased it four years before. The smelter was originally built to produce lead but in a few short years, would become a major supplier of copper. A comparison of an earlier view of the smelter, taken circa 1888, now shows a completed pier on the right and an additional large building on the property. In 1905 the American Smelting & Refining Co. (ASARCO) bought the company and it remained an important part of Tacoma's economy until its closure in 1985. (New England Magazine - February, 1893 p.800) (See Rutter, image 01, for view of smelter circa 1888)

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma; Industrial facilities--Tacoma;

Tacoma Smelter, ASARCO. A large riveted-steel crane with bucket dumping raw ore. It is one of two electric ore cranes on the smelter docks. It empties ore from the ship's holds into a hopper on the dock. The North End Lumber Company and buildings are in the background. (T.Times 9/13/1935, pg. 3)

Copper industry--Tacoma--1930-1940; Smelters--Tacoma; American Smelting & Refining Co. (Tacoma); North End Lumber Co. (Tacoma); Lumber industry--Tacoma--1930-1940;

Waste-heat boilers at Tacoma Smelter (ASARCO) showing pipes within frame work, some pipes continue to floor below.

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1930-1940; Copper industry--Tacoma--1930-1940; Industrial facilities--Tacoma;

On January 27, 1938, diver George Wayne donned his diving suit and entered the waters of Commencement Bay just off shore from the ASARCO smelter to retrieve the body of ASARCO employee Fred Birkby. Mr. Birkby was drowned that morning when the slag train on which he was riding overturned into the bay. It took diver Wayne about four minutes to locate the body wedged between the slag dump and one of the capsized slag pots in approximately eight feet of water. Recovery of the body was at 3:40p.m. (T.Times, 1/28/1938, pgs. 1 & 18, 1/27/1938, pg. 1)

Copper industry--Tacoma--1930-1940; Smelters--Tacoma; Laborers--Tacoma; American Smelting & Refining Co. (Tacoma); Railroad accidents--Tacoma--1930-1940; Diving; Diving suits--1930-1940;

The American Smelting & Refining Co. (ASARCO Incorporated) Tacoma Plant. TPL-2353. Areas of the plant are labelled with arrows and typed notations. Typed notations read, left hand side, top to bottom: Main Stack, Silos, ESP'S (Hoppers), Flue, Metallic Arsenic Area, Arsenic Kitchens, Arsenic Roasters (Hoppers, Roaster Baghouse Hoppers, Herreshoff Roasters), Acid Plant Bldg (Settling Tanks & Basin), Fine Ore Storage (Settling, evaporation and neutralization impoundment Waste Piles), Liquid SO2 Plant. Across the top, left to right: Laboratory Container Storage, Reverberatory Furnaces, Oil Tanks, Refineries, Settling & Evaporation Basins. Right hand side, top to bottom: Slag Dump, Casting Furnace, Anode Furnaces, Nickel Plant, Converters, Unloading Dock, Crushing & Sampling Mill, Incinerator, and Ore Piles. TPL-2353, TPL-6246

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1950-1960; Copper industry--Tacoma--1950-1960;

American Smelting and Refining Company (ASARCO), Tacoma. Glowing, molten liquid ore pouring from a reverbatory furnace into a huge ladle. Two workers on the left are dwarfed by the size of the equipment. The furnace heats the ore to 2,700 degrees Farenheit. For J. Gius, reporter. (T. Times 1/19/1935, pg. 1)

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1930-1940; Copper industry--Tacoma--1930-1940; Industrial facilities--Tacoma;

General overview of the American Smelting and Refining Company (ASARCO), Tacoma, as it appeared in 1935. Once the tallest smoke stack in the world, the brick structure billows smoke as it looms far above its industrial buildings. The stack was imploded in the 1990s after the refinery closed. (T. Times 1/19/1935, pg. 1)

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1930-1940; Copper industry--Tacoma--1930-1940; Industrial facilities--Tacoma;

Waste heat boiler at the Tacoma smelter (ASARCO) installed by Puget Sound Machinery Depot, August 24, 1939.

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1930-1940; Copper industry--Tacoma--1930-1940; Industrial facilities--Tacoma;

Feed belts at Tacoma Smelter. The belts were located under the ore dock where concentrates and ore were received from ships. View of smelter operations taken in November of 1923. G37.1-193 (Additional information provided by a reader)

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1920-1930;

This aerial view of Tacoma shows the American Smelting & Refining Company's (ASARCO) smoke stack, plant and the surrounding area as it looked in July of 1953. The ASARCO smoke stack was a dominant feature in the Tacoma skyline from its construction in 1917 to its implosion in 1993. The plant stood near Point Defiance. Here large vessels can be seen pulled up to the dock to be loaded with metals to be shipped throughout the world. To the left can be seen part of the marina of the Tacoma Yacht Club and to the lower right, the city of Ruston. TPL-8483

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1950-1960; Copper industry--Tacoma--1950-1960;

ca. 1978. ASARCO plant. Exterior view in early 1978 of the American Smelting & Refining Company (ASARCO) with focus on large diameter fiberglas reinforced pipe manufactured by Chemical Pipe & Tank (owned by Barthel Co.) and the Barthel Co. and installed by the National Blower & Sheet Metal Co., fabricators of structural steel and miscellaneous iron. The lines may have been 33 inches on the smaller line and six feet diameter on the larger one. Photograph ordered by National Blower & Sheet Metal Co. (Additional information provided by a reader)

American Smelting & Refining Co. (Tacoma); National Blower & Sheet Metal Co. (Tacoma); Chemical Pipe & Tank Co. (Tacoma); Barthel Chemical Construction Co. (Tacoma);