ca. 1937. St. Regis Kraft Co.; filtering plant circa 1937. (WSHS)

St. Regis Paper Co. (Tacoma)--1930-1940; Mills--Tacoma--1930-1940; Paper industry--Tacoma--1930-1940;

This aerial view of St. Regis Paper Company's chip operations was taken in mid-September of 1964. A barge marked "Vancouver Tug" unloads tons of pulp-mill chips at the Tacoma kraft mill of St. Regis Paper. Two large mountains of chips are in storage outside side-by-side. Photograph ordered by Malcolm McGhie, industrial consultant, New York.

Aerial photographs; St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Barges--Canada--Vancouver;

St. Regis Paper Co. president and CEO William R. Adams stands next to enormous rolls of (kraft) paper on June 15, 1965, during a visit to the company's Tacoma plant. Adams, of New York, was in Tacoma along with Chrm. of the Board Roy Ferguson for dedication ceremonies commemorating the grand opening of the company's new $5,000,000 veneer plant and studmill. He would speak to 400 invited guests at a luncheon held at the plant site. Photograph ordered by St. Regis Paper Co., New York. (TNT 6-16-65, p. 1)

St. Regis Paper Co. (Tacoma)--1960-1970; Adams, William R.;

Informal portrait of St. Regis Paper Co. president and CEO, William R. Adams. Mr. Adams paid a visit to the company's Tacoma plant in mid-June, 1965. He stands with his arms crossed near rolls of (kraft) paper. He and Chairman of the Board Roy Ferguson were present for the dedication of St. Regis' new veneer plant and studmill. The new studmill had an annual capacity of 40 million board feet. The veneer plant used peeler logs for its plywood plants in Tacoma and Olympia. Photograph ordered by St. Regis Paper Co., New York. (TNT 6-16-65, p. 1)

St. Regis Paper Co. (Tacoma)--1960-1970; Adams, William R.;

Chip feeder in operation at St. Regis Paper Co. May, 1961, photograph of one of the chip feeders on wheels employed at the St. Regis Paper Co. plant in Tacoma. Pounds of wood chips accumulate on wooden shelf. Photograph ordered by Improved Machinery, Inc.

St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Machinery;

Western Gear Corporation of Seattle installed new machinery at St. Regis Paper Co. Tacoma plant on October 13, 1961. View of machine with mountain of pulp-mill chips in background. The kraft mill stored outdoors piles of the chips, most of them purchased from local plywood and sawmills.

Machinery; Western Gear Corp. (Seattle); St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970;

The Samuel M. Langston Co. of Camden, N.J., made equipment for the corrugated container industry for over 100 years. View of Langston machinery at the St. Regis Paper Co. plant in September, 1961; machines may include the counter roll rewinder and/or shaftless rewind stand. Large roll of kraft paper on Langston machine. Northern Pacific boxcars conveniently located in rear of picture. Photograph ordered by the Samuel M. Langston Co.

Machinery; Paper industry--Tacoma--1960-1970; St. Regis Paper Co. (Tacoma)--1960-1970; Railroad freight cars--Tacoma;

On spec. for the Times, Labor Day. Interior views of the St. Regis Paper Company. As of January 1947 St. Regis Paper Company used up to 17 million gallons of water a day in its pulp processing. The plant had many miles of piping throughout all of its processes. In December 1946 a paper machine was installed.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950;

On spec. for the Times, Labor Day. Interior view of the St. Regis Paper Company. From the woodroom chunks of wood were moved to wood chippers where they were broken into fine chips. These went into a hopper in the top of a digester where the chips were broken down by chemicals and the resulting pulp was washed and bleached, looking much like white snow. The paper would be nearly all water at this part of the process. It was sprayed in a thin sheet on screens where it was gradually dried out over a long roller.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950;

In this aerial view of the Tacoma tideflats the St. Regis Paper Company can be found at the base of the large plume of smoke and steam in the center of the picture. The St. Regis Paper Company was established in Tacoma in 1928 and rebuilt and modernized in 1936. In August 1947 the company announced plans for a $6 million addition of a Kraft paper mill and multi wall bag plant, to be operational the first quarter of 1949.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Aerial photographs; Tacoma Tideflats (Tacoma);

In August of 1947 an unidentified "boom man", wearing "corked" boots and wielding a pikepole, was photographed sorting logs for the St. Regis Paper Company. St. Regis was established in Tacoma in 1928 and rebuilt and modernized in 1936. In August 1947 the company announced plans for a $6 million addition of a Kraft paper mill and a multi-wall bag plant. Simpson Tacoma Kraft took over the St. Regis mill in Tacoma in 1985. (On spec. for the Times, Labor Day.) TPL-9492

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Commencement Bay (Wash.); Logs;

On spec. for the Times, Labor Day. Interior views of the St. Regis Paper Company. William Youngchild, a veteran Tacoma papermaker with 55 years in the industry, watches rolls of pulp in one of the final processes at St. Regis mill.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Youngchild, William; Machinery;

An aerial photograph taken in April, 1954, shows smoke billowing from the St. Regis Paper Co. facilities on the tideflats. The wide building to the right is the company's multi-wall bag plant built a few years prior; the narrow building to its rear is the kraft-pulp division. Logs are massed together in the log dump nearby.

St. Regis Paper Co. (Tacoma)--1950-1960; Paper industry--Tacoma--1950-1960; Mills--Tacoma; Logs; Aerial photographs;

ca. 1961. Customer print of aerial view of St. Regis Paper Co. plant and looming Mount Rainier, ca. 1961. By 1961, St. Regis was one of the most widely diversified manufacturers of paper and packaging. It had 111 mills, converting and manufacturing plants and was the only company with mills in all paper-making areas of the country. Tacoma had a new kraft paper and paperboard machine that went into production in 1961. The machine's rated capacity was 400 tons a day and it made a sheet over 20 feet wide. The kraft machine was a major element in a substantial program of expansion and modernization that had been going on in Tacoma for more than two years. (1961 St. Regis Annual Report)

St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Factories--Tacoma--1960-1970; Rainier, Mount (Wash.);

ca. 1959. The St. Regis Paper Co. kraft pulp and paper mill and multiwall bag plant at Tacoma, Washington. The plant was a major producing unit serving the western states. Late in 1959, construction was started to expand the pulp mill and install a second machine which would produce kraft paper and board, more than doubling the output of the mill. The new kraft paper and paper board machine was 130 feet wide and 630 feet long. It would require 150 additional employees at a payroll of 3/4 million dollars. Additions were being made to the steam and recovery plants, pulp mill (left) and to the paper mill (right.) (St. Regis Paper Co. Annual Report- 1959; TNT 11/5/1959, pg. 1)

Paper industry--Tacoma--1950-1960; Mills--Tacoma; Logs; St. Regis Paper Co. (Tacoma)--1950-1960;

In 1949 St. Regis ranked among the top companies in the paper and pulp industry. Interior view of St. Regis plant, Ederer cranes with 24 ton capacity are being used in paper mill. Photo ordered by Ederer Engineering Company, cranes, hoist and veneer machinery manufacturers based out of Seattle, Washington.

Paper industry--Tacoma--1940-1950; Hoisting machinery; Pulleys; Equipment; Machinery industry--Tacoma; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Ederer Engineering Co. (Seattle);

Logs for the St. Regis pulp mill were originally supplied by the St. Paul and Tacoma lumber mill; these two companies established a partnership since the beginning of St. Regis' operations. In 1949 St. Regis began producing paper at the Tacoma plant. View of General Electric machinery; photo ordered by General Electric Company, machinery and equipment manufacturers.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma--1940-1950; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

Interior view of St. Regis plant, paper manufacturing department; The Electric Construction Company, an engineering and contracting business, logo and information appears in the upper left corner. View of General Electric machinery; photo ordered by General Electric Company, machinery and equipment manufacturers.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma); Electric Construction Co. (Tacoma);

Since the 1930's St. Regis had been investing money to eliminate the offensive "odor" produced by the plant; the company would continue to address this issue and pollution questions for many years. Interior view of plant and view of General Electric machinery; photo ordered by General Electric Company, machinery and equipment manufacturers.

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

Interior view of St. Regis, view of paper producing machinery, two unidentified laborers are working with what appears to be a large roll of kraft paper, "Ederer Engineers" crane is being used, this machine was manufactured in Seattle. Photo ordered by Pusey & Jones Corporation, a machinery manufacturer from Wilmington, Delaware.

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Mechanical systems--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Pusey & Jones Corp. (Tacoma);

St. Regis has been expanding and improving their facilities and plants throughout the world based on research being conducted in their Research and Development Departments. The company's laboratories are ranked among the highest in the paper and pulp industry. View of unidentified men in research and testing area in Tacoma's St. Regis plant in this photograph dated January 21, 1949. (S4)

Paper industry--Tacoma--1940-1950; Product inspection--Tacoma; Testing--Tacoma; Research facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

The St. Regis laboratories were conducting various types of research related to the pulp and paper industry. In 1949, they were focusing in an extensive program connected with pulping, new paper coatings, and new paper products. The laboratories helped maintain high levels of quality control. View of unidentified men in research and testing area at Tacoma's St. Regis plant. (S5)

Paper industry--Tacoma--1940-1950; Product inspection--Tacoma; Testing--Tacoma; Research facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis was able to broaden their range of products and increase production capacity by enlarging their Tacoma plant and beginning the production of kraft paper. Interior view of St. Regis plant, Ederer cranes with 24 ton capacity are being used in paper mill. Photo ordered by Ederer Engineering Company, cranes, hoist and veneer machinery manufacturers based out of Seattle, Washington.

Paper industry--Tacoma; Hoisting machinery; Pulleys; Equipment; Machinery industry--Tacoma; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Ederer Engineering Co. (Seattle);

St. Regis was one of the largest industries in Tacoma and was located in Tacoma's Tide Flats industrial area. The company was undergoing a big expansion project in 1948. This building, currently under construction, would be used to manufacture pulp. Exterior view of St. Regis Paper Company--Kraft Pulp Division industrial plant (T. Times, 8/31/48, p. 22).

Industrial facilities--Tacoma; Aerial photographs; Waterfronts; Paper industry--Tacoma--1940-1950; St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis Company announced that major plant reconditioning and expansions would begin. This will help reduce the levels of air pollution and increase the air quality in Tacoma. A reduction of solids in smoke has caused a reduction in odor. St. Regis is installing Cottrell smoke treatments in their plant with an estimated cost of $6,000,000. This process should help reduce air pollution. View of laborers applying foam glass insulation to roof at St. Regis Paper Company (T.Times, 7/31/48, p. 1).

Roofs--Tacoma; Paper industry--Tacoma--1940-1950; Industrial facilities--Tacoma; Laborers--Tacoma; Air quality--Tacoma; Air pollution--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

Progress photographs at St. Regis, St. Regis Paper Company, Kraft Pulp Division. A view of the interior of one of the new buildings at St. Regis with the exterior walls still missing. A row of Jordans, each driven by a 400 hp. motor, is laid out close to what will be an exterior wall. The Jordans will prepare stock for the paper machines that have not yet been built. (St. Regis 1949 Annual Report)

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Factories--Tacoma--1940-1950;

Port of Tacoma aerials. A view of St. Regis and the nearly completed kraft paper plant seen in the foreground. The company is located along the Puyallup Waterway on the Tacoma tideflats.

Aerial photographs; Progress photographs; St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950;

An aerial view looking east across the Tacoma tideflats with St. Regis Paper Company in the foreground. St. Regis was nearing completion of a $6 million addition to their kraft paper plant and adding a multi-wall bag plant. They have been at this location on the tideflats since 1936.

Aerial photographs; St. Regis Paper Co. (Tacoma)--1940-1950; Progress photographs; Paper industry--Tacoma--1940-1950; Lumber industry--Tacoma--1940-1950; Industrial facilities--Tacoma--1940-1950;

Progress photograph at plant, St. Regis Paper Company, Mr. McCarthy. Roofing on the addition has nearly been completed. According to the 1949 St. Regis Annual Report the company operated mills and plants at 23 locations in the United States and six plants in Canada and other foreign countries. The company was organized in 1899 and built a mill at Deferiet, New York, that same year.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Factories--Tacoma--1940-1950; Progress photographs;

Interior progress photograph, St. Regis, McCarthy. The exterior walls of the new Kraft Paper plant have been installed and the row of "Jones Majestic" Jordans have been connected along the wall. The Jordans, each driven by a 400 h.p. motor, cut the fiber and prepared it for the paper machines which are nearing completion further along the wall. (TNT, 2/15/1949, p.B-3)

St. Regis Paper Co. (Tacoma)--1940-1950; Progress photographs; Machinery; Factories--Tacoma--1940-1950; Paper industry--Tacoma--1940-1950;