Back of Photo:
"St. Regis - Western Star Paper Machine
Clipping taped to back: "READ ALL ABOUT IT--Seven St. Regis Paper Co. officials, her for this morning's official dedication of the company's $30,000,000 expansion of its Tacoma kraft pulp and paper mill, look over a special 18-page section of The News Tribune, marking the event. Seated, left to right, are Phillip B. Duffy, vice president, the corrugated container division; Reginald L. Vayo, vice president, kraft division sales; and Kenneth D. Lozier, vice president, of advertising and sales promotion, all of New York. Standing are George J. Kneeland, New York, assistant vice president; Russell R. Major, Tacoma, assistant comptroller; John A. McDermott, Jacksonville, Fla., vice president, pulp and paper manufacturing; and Dr. William R. Haselton, general manager of the Tacoma plant."

Potlatch Forests plant operations. One Potlatch Forests employee handles the controls while another checks the progress of the rolls of kraft pulp in mid-October, 1969. This plant in Lewiston, Idaho, produced high quality softwood bleached kraft market pulp and bleached paperboard. Photograph ordered by Malcolm McGhie, industrial consultant, New York.

Potlatch Forests, Inc. (Lewiston, ID); Industrial facilities--Idaho; Paper industry--Idaho--1960-1970; Lumber industry--Idaho--1960-1970;

Scenes from Lewiston, Idaho, Potlatch operations. A young worker stands before mounted rolls of kraft pulp at the big Lewiston plant in mid-October of 1969. The rolls extend far into the distance. He appears to be putting in a metal rod through the hole of the roll. Photograph ordered by Malcolm McGhie, industrial consultant, New York.

Potlatch Forests, Inc. (Lewiston, ID); Lumber industry--Idaho--1960-1970; Paper industry--Idaho--1960-1970; Industrial facilities--Idaho;

Pulp & paper operations - Potlatch Forests, Inc. Potlatch Forests used a full range of species found in the northern Idaho timberlands to produce a variety of lumber products. Its Lewiston, Idaho, sawmill manufactured products used in construction framing to board sidings and paneling. Inland red cedar, pine, and fir mixtures were commonly utilized. An employee of Potlatch Forests is shown above on March 20, 1969, examining a piece of lumber. All of Potlatch Forests' products conformed to specific grading rules. Photograph ordered by Malcolm McGhie, industrial consultant, New York. (www.potlatchcorp.com)

Potlatch Forests, Inc. (Lewiston, ID); Paper industry--Idaho--1960-1970; Lumber industry--Idaho--1960-1970; Industrial facilities--Idaho;

Early evening exposure of Potlatch Forests, Inc., Lewiston, Idaho plant. Richards Studio had made several trips over the years to Idaho to photograph Potlatch Forests, Inc., pulp and paper operations. The above photograph was taken in July of 1968 for Malcolm McGhie, industrial consultant, New York. Potlatch operations continued even at night as the resulting smoke from stacks can testify. The bright lights of the mill reflect on the nearby water's surface.

Potlatch Forests, Inc. (Lewiston, ID); Lumber industry--Idaho--1960-1970; Paper industry--Idaho--1960-1970;

Pulp & paper operations in Lewiston, Idaho. A Potlatch Forests, Inc., employee arranges sheets of plywood into three separate stacks during his work shift on July 8, 1968. These plywood sheets will be lowered onto the conveyor belt below and placed next to other stacks. Photograph ordered by Malcolm McGhie, industrial consultant, New York.

Potlatch Forests, Inc. (Lewiston, ID); Paper industry--Idaho--1960-1970; Lumber industry--Idaho--1960-1970; Plywood; Mills--Idaho--Lewiston;

Weyerhaeuser Co. executives concluded the three day meeting in 1969 of sales managers from across the country with a banquet believed to have been held at the Winthrop Hotel. Signs promoting the "Big W Home Coming" were prominently displayed throughout the room. Nearly 100 sales managers had gathered to celebrate the solid year of sales from the wood products group. (TNT 2-2-69, B-8)

Weyerhaeuser Timber Co. (Tacoma); Meetings--Tacoma--1960-1970; Banquets--Tacoma--1960-1970; Signs (Notices);

Weyerhaeuser Co. sales managers from all over the nation met for their "Big W Homecoming" using both the Winthrop Hotel and the University of Puget Sound in the early part of February, 1969. George H. Weyerhaeuser, president and chief executive officer, points out the large "W" on a men's jacket. The nearly 100 managers from the wood products group were in Tacoma for a three-day conference where they would discuss sales objectives, marketing strategies and recap 1968, the best sales year in the history of the wood products group. Photograph ordered by the Weyerhaeuser Co. (TNT 2-2-69, B-8)

Weyerhaeuser, George H.; Weyerhaeuser Timber Co. (Tacoma); Meetings--Tacoma--1960-1970;

Two students play ping-pong in the Chapter Room at Kappa Sigma House. The walls have been covered with knotty-pine paneling. This fraternity became the first at the College of Puget Sound to employ a permanent house mother in 1950. Ordered by Douglas Fir Plywood Association, Tom Sias.

Douglas Fir Plywood Association (Tacoma); Table tennis--Tacoma; Students--Tacoma--1950-1960; Fraternities & sororities--Tacoma--1950-1960; College of Puget Sound (Tacoma)--1950-1960; Kappa Sigma (Tacoma);

The interior of one of the classrooms at Lowell School showing the visual aid furniture. Elementary school students sit on the floor to watch while a young teacher displays paintings from an easel made of plywood. Artwork is also displayed on the wall behind the easel. Ordered by Douglas Fir Plywood Association. TPL-8334

Douglas Fir Plywood Association (Tacoma); Lowell Elementary School (Tacoma); Classrooms--Tacoma; School children--Tacoma--1950-1960; Public schools--Tacoma--1950-1960; Teachers--Tacoma--1950-1960; Easels;

This unidentified young woman was busy cleaning and inspecting 16 mm films at Central School in November of 1951. She sat at a film winder within easy reach of film canisters on a rack made of plywood. Each film used in a classroom had to be cleared and checked for damage after each use. The rack has three deep shelves, the top two made with a deep V to hold the round film canisters upright, and rollers for easily moving the canisters from racks against the wall throughout the facility. Ordered by Douglas Fir Plywood Association.

Plywood; Douglas Fir Plywood Association (Tacoma); Central School (Tacoma); Audiovisual materials; Motion pictures;

Two men are sliding a panel with several strips of siding into the humidity chamber at the plywood lab while a third man is setting the control panel for the correct test conditions. Ordered by Douglas Fir Plywood Association.

Plywood; Douglas Fir Plywood Association (Tacoma); Testing--Tacoma; Product inspection--Tacoma; Lumber industry--Tacoma--1950-1960; Research facilities--Tacoma; Plywood Research Foundation (Tacoma);

Studio set-up of hand board chips and shreds. Ordered by Douglas Fir Plywood Association.

Douglas Fir Plywood Association (Tacoma); Lumber industry--Tacoma--1950-1960;

For Bethlehem Pacific Coast Steel Corporation, 20th and Illinois Street, San Francisco, CA. Dramatic image of completed steelwork at new Weyerhauser pulp mill, Longview, WA, taken in September of 1951. L- shaped building with large crane in yard near small wood buildings.

Weyerhaeuser Timber Co. (Longview); Mills--Longview; Building construction--Longview; Hoisting machinery;

Presentation of award to the president of U.S. Plywood, Tony Antoville (on right.) Photograph ordered by the DFPA. United States Plywood Corp. was one of the first companies to build after the industry was decontrolled. It opened a 36 million foot capacity plant at Mapleton, Oregon in 1948. By 1955, the firm controlled four plants with a total capacity of 342 million feet annually.

Plywood; Lumber industry--Seattle--1950-1960; United States Plywood Corp. (Seattle); Antoville, Tony;

Plywood displays for the Douglas Fir Plywood Association. A cabinet is viewed from above topped with an assortment of power tools, hand tools and plywood trim pieces. These are the materials and tools used in a woolworking display captured in this photographic series (D89928.) This cabinet would be perfect for the home handyman to store his tools and small materials or for the hardware store to shelve small items. The DFPA, located in the Fuller building in Tacoma, was constantly promoting its product and its myriad uses. The plywood industry exploded in the Northwest thanks to this dedicated self promotion.

Plywood; Douglas Fir Plywood Association (Tacoma); Drills (Equipment); Hammers; Woodworking--Tacoma;

The Douglas Fir Plywood Association's (DFPA) annual meeting in 1955. The Golden Jubilee Convention was held in Portland, Oregon, celebrating 50 years of the plywood industry from its inception in 1905 to 1955. Over 12,000 plywood manufacturers and distributers attended the meeting. One of the highlights was the unveiling of the Plywood Memorial at the Forestry building in Portland. The Memorial was designed around the original sheet of plywood manufactured in 1905 for display at the Lewis and Clark International Exposition in Portland.

Douglas Fir Plywood Association (Portland); Exhibition buildings--Portland; Exhibitions--Portland; Plywood;

Two employees of the U.S. Plywood Corporation examine sheets of plywood in their Seattle plant on January 6, 1956. They were manufacturers of the "Weldwood" brand of Douglas fir plywood. U.S. Plywood had two locations in Seattle including a lumber division on E. Marginal Way. It also had plants in Mapleton, Oregon, and a 60 million foot capacity mill in Anderson, California. By 1954, with the addition of Associated Plywood Mills' two holdings, U.S. Plywood was capable of 342 million feet annually. (Cour: Plywood Age, p. 158-59)

Plywood; Lumber industry--Seattle--1950-1960; United States Plywood Corp. (Seattle);

Ordered by the Douglas Fir Plywood Association; plywood being used in the construction of a commercial "chicken house." Plywood is being attached to the exterior of the beams to form the curved roof of the chicken house. The entrance area and a ventilation window can be seen. This is the back of the house. This is possibly the Fife farm of the Guy Conine family. The family raised poultry in three chicken houses, one conventional and two of the quonset hut design. They raised Van Tress hybrid crosses, Washington Whites and Lancaster Whites. The laminated beam construction of the two quonset hut variety eliminated the need for posts for support. All feeding and watering was automatic. (TNT 10/28/1956, pg. B-6)

Plywood; Construction; Poultry houses; Poultry industry;

The busy mail room of the Douglas Fir Plywood Association. A large mailer is being prepared. Some women fold the materials to be mailed and others stuff the envelopes. One of the jobs of the association was the promotion of the plywood product and the industry itself. One of the association's main sources of self promotion was the U.S. mail and the company maintained a large mail room to meet its demands.

Douglas Fir Plywood Association (Tacoma); Offices--Tacoma--1950-1960; Office workers--Tacoma--1950-1960; Correspondence;

Cheney Lumber Co.; packages of two by four "Cheney Studs" being readied for shipment in the railroad cars behind. Ben Cheney got his start in the lumber business in 1936 during the depression. By the late 1930's, he was supplying railroad ties nationally and internationally. Cheney was wholesaling the production of 140 portable mills throughout the northwest, selling their ties on a commission basis. As timber became more difficult to obtain cheaply, he became concerned over the side-cut slab wastage, often 2/3 of the log. He came up with the idea of supplying the housing market with standard 8 foot studding, the same length as railroad ties were cut. He even obtained a lower transportation cost from the Interstate Commerce Commission, making production even more economical. Cheney renamed the "shorts," as these 8 foot pieces had been called, "Cheney Studs." Studs became the standard in the building trade and Cheney is credited with standardizing the roof height in US residential construction. ("The Sou'wester" Volume xxxv, Number 3, Fall 2000)

Lumber industry--Tacoma--1950-1960; Lumberyards--Tacoma; Lumber--Tacoma; Building materials industry--Tacoma--1950-1960; Cheney Lumber Co. (Tacoma); Shipping--Tacoma--1950-1960;

Cheney Lumber Company's booth at the 1956 Greater Tacoma Home Show. A young Cheney Studs football player poses in uniform with one of the trophies. His uniform features the Cheney "stud" horse logo on the chest. "Studs" were what Cheney renamed the 8 foot 2 x 4 lumber "shorts" that revolutionized the building materials industry. On the back wall are photos of the young man's football team mates, as well as other Cheney teams. One sign points out that the amateur Cheney Studs baseball team was the national runnerup in the 1955 American Baseball Congress.

Lumber industry--Tacoma--1950-1960; Lumberyards--Tacoma; Lumber--Tacoma; Building materials industry--Tacoma--1950-1960; Cheney Lumber Co. (Tacoma); Greater Tacoma Home Show (Tacoma); Awards; Football players--Tacoma--1950-1960;

A model of one of Ben Cheney's lumberyards is displayed at the Cheney booth at the 1956 Greater Tacoma Home Show. Miniature stacks of Cheney "studs" dot the landscape. The Tacoma Home Show was held May 11-20, 1956 at the College of Puget Sound Fieldhouse. Over 100 local and national companies set up exhibit booths emphasizing products for the home. Cheney "studs" were 8 foot lengths of 2x4 timber that established the residential ceiling height in America.

Lumber industry--Tacoma--1950-1960; Lumberyards--Tacoma; Lumber--Tacoma; Building materials industry--Tacoma--1950-1960; Cheney Lumber Co. (Tacoma); Greater Tacoma Home Show (Tacoma); Models;

Pencil behind his ear, a worker ponders the placement of a sheet of plywood on forms already in place. One large sheet is already been nailed on. The man needs to stand on a wooden plank to reach the forms as the building's foundation is already set and the ground excavated. Each plywood sheet is labeled "Plyscord" and stamped in numerous places informing buyers that this genuine fir plywood has undergone stringent testing for quality. Photograph ordered by Douglas Fir Plywood Association.

Plywood; Building construction; Douglas Fir Plywood Association (Tacoma);

A young model enjoys an appetizing snack as she lounges on an extended sofa in a September 13, 1954, photograph. The plates of food are placed on a four legged TV table whose ends are tilted upward. The TV table, made out of wood, was built at the right height for someone sitting in front of it or for use as a miniature coffee table. Photograph ordered by Douglas Fir Plywood Association.

Plywood; Tables; Douglas Fir Plywood Association (Tacoma);

Architects in the firm of Jensen & Mills examine a small display of Douglas Fir Plywood Association promotional material in their Jones Building office on November 19, 1954. The plywood association always stressed the stringent quality controls utilized in approving plywood for numerous uses. The DFPA label on plywood meant that customers could count on the association standing behind its product. Photograph ordered by Douglas Fir Plywood Association.

Douglas Fir Plywood Association (Tacoma); Merchandise displays--Tacoma--1950-1960; Advertising--Tacoma--1950-1960; Jensen & Mills (Tacoma);

The enormous splash generated as a giant peeler log is dumped into the log dump nearly obscures sight of the log. This Douglas fir log, along with several others, was used in a Bellingham parade on November 27, 1954, as entries sponsored by Georgia-Pacific Plywood Co. Harvested locally from timbered forests, the logs were marched down the city's main streets, providing an impressive display for local spectators. Georgia-Pacific wanted to stress that each log contained enough material to be used in making forty average houses. Photograph ordered by Georgia-Pacific Plywood Co.

Logs; Basins (Bodies of water)--Bellingham;

Two young ladies, who look very much alike, proudly sport banners identifying themselves as "Miss Georgia" and "Miss Pacific" as the Georgia-Pacific Plywood's entries in the November 27, 1954, Bellingham parade take a momentary pause. The plywood company had sponsored several giant peeler logs mounted on heavy duty trucks for the parade. The large banners on the logs' sides make it clear that these trees were harvested locally from timber forests in our state. Photograph ordered by Georgia-Pacific Plywood.

Logs; Parades & processions--Bellingham--1950-1960; Signs (Notices);

A scantily clad young woman cheerfully waves her hat at parade spectators while perched on top of a R.E. Gray Trucking System cab on November 27, 1954. The truck is hauling a giant peeler log courtesy of the Georgia-Pacific Plywood Co. which was cut from timber forests in Washington State. Bellingham apparently had a parade in late November in which several giant logs were on display to parade viewers. Photograph ordered by Georgia-Pacific Plywood Co.

Logs; Parades & processions--Bellingham--1950-1960; Trucks--Bellingham--1950-1960;

Multiple windows provide plenty of natural light for office employees of the Puget Sound Plywood company. In addition, there are several lengthy fluorescent lights overhead. Puget Sound Plywood was the first cooperative plywood plant in the city. It manufactured plywood and promoted the convenience and durability of plywood in a number of ways. Instructions were provided for the do-it-yourselfer or professional on the building of storage units, including showing the plans in 3-D format and also built-ins. Photograph ordered by Douglas Fir Plywood Association.

Puget Sound Plywood, Inc. (Tacoma); Puget Sound Plywood, Inc. (Tacoma)--Employees; Lumber industry--Tacoma--1950-1960; Office workers--Tacoma--1950-1960; Signs (Notices); Douglas Fir Plywood Association (Tacoma); Cooperatives--Tacoma;