On spec. for the Times, Labor Day. Interior views of the St. Regis Paper Company. As of January 1947 St. Regis Paper Company used up to 17 million gallons of water a day in its pulp processing. The plant had many miles of piping throughout all of its processes. In December 1946 a paper machine was installed.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950;

On spec. for the Times, Labor Day. Interior view of the St. Regis Paper Company. From the woodroom chunks of wood were moved to wood chippers where they were broken into fine chips. These went into a hopper in the top of a digester where the chips were broken down by chemicals and the resulting pulp was washed and bleached, looking much like white snow. The paper would be nearly all water at this part of the process. It was sprayed in a thin sheet on screens where it was gradually dried out over a long roller.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950;

In this aerial view of the Tacoma tideflats the St. Regis Paper Company can be found at the base of the large plume of smoke and steam in the center of the picture. The St. Regis Paper Company was established in Tacoma in 1928 and rebuilt and modernized in 1936. In August 1947 the company announced plans for a $6 million addition of a Kraft paper mill and multi wall bag plant, to be operational the first quarter of 1949.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Aerial photographs; Tacoma Tideflats (Tacoma);

In August of 1947 an unidentified "boom man", wearing "corked" boots and wielding a pikepole, was photographed sorting logs for the St. Regis Paper Company. St. Regis was established in Tacoma in 1928 and rebuilt and modernized in 1936. In August 1947 the company announced plans for a $6 million addition of a Kraft paper mill and a multi-wall bag plant. Simpson Tacoma Kraft took over the St. Regis mill in Tacoma in 1985. (On spec. for the Times, Labor Day.) TPL-9492

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Commencement Bay (Wash.); Logs;

On spec. for the Times, Labor Day. Interior views of the St. Regis Paper Company. William Youngchild, a veteran Tacoma papermaker with 55 years in the industry, watches rolls of pulp in one of the final processes at St. Regis mill.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Youngchild, William; Machinery;

An employee at St. Regis watches to be sure all goes well in the wet pulp to paper process in the new kraft paper plant. Ordered by McGraw Hill Publishing Co., Inc., New York, NY.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950;

Chip feeder at St. Regis plant, Link Belt Company, Mr. R.W. Johnson. Bark was first removed from logs and moved to the woodroom. From the woodroom chunks of wood were moved to wood chippers where they were broken into fine chips. These went into a hopper in the top of a digester where the chips were broken down by chemicals and the resulting pulp was washed and bleached. This large, funnel-shaped machine handled the fine chipping and delivery to the digester.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Machinery;

An aerial photograph taken in April, 1954, shows smoke billowing from the St. Regis Paper Co. facilities on the tideflats. The wide building to the right is the company's multi-wall bag plant built a few years prior; the narrow building to its rear is the kraft-pulp division. Logs are massed together in the log dump nearby.

St. Regis Paper Co. (Tacoma)--1950-1960; Paper industry--Tacoma--1950-1960; Mills--Tacoma; Logs; Aerial photographs;

Several men are adjusting the printing machinery at St. Regis Paper Company's new bag plant. Bags were printed in the shop before being made into bags. A man on the right end checks the printing. Two other men further to the right are checking that the rolls of paper are feeding smoothly.

St. Regis Paper Co. (Tacoma)--1950-1960; Mills--Tacoma--1950-1960; Paper industry--Tacoma--1950-1960;

Four people work along side the folding machines at St. Regis Paper Company's new bag plant tending the machines and gathering the sacks to stack.

St. Regis Paper Co. (Tacoma)--1950-1960; Mills--Tacoma--1950-1960; Paper industry--Tacoma--1950-1960;

A huge roll of brown paper at St. Regis Paper Company's new bag plant is being moved using a crane manufactured by Ederer Engineering Company. The crane is located near the roof of the large warehouse and cables from the crane hold arms that grab the rolls of paper. The rolls can be moved both vertically and horizontally throughout the warehouse where tall stacks of the rolls of paper are seen.

St. Regis Paper Co. (Tacoma)--1950-1960; Mills--Tacoma--1950-1960; Paper industry--Tacoma--1950-1960; Paper--Tacoma; Hoisting machinery; Ederer Engineering Co. (Seattle); Machinery industry--Tacoma--1950-1960;

Many employees are working at several different machines inside St. Regis Paper Company's new bag plant where bags are printed, assembled, stacked, and bundled. Overhead wiring provided electricity to run the many sewing machines and conveyor belts.

St. Regis Paper Co. (Tacoma)--1950-1960; Mills--Tacoma--1950-1960; Paper industry--Tacoma--1950-1960; Sewing machines;

An aerial view of St. Regis Paper Company's completed multi-wall bag plant in the foreground with white walls, dark roof and small white chimneys dotting the roof.

Paper industry--Tacoma--1950-1960; Mills--Tacoma; Logs; St. Regis Paper Co. (Tacoma)--1950-1960;

An aerial view of St. Regis plant showing the company's new multi-wall bag plant on the right. The narrow building behind it is the kraft-pulp division. The plant is located on the Tacoma tideflats at the end of the land between the Puyallup Waterway and St. Paul Waterway. Log booms are tied together off the end of the property.

Paper industry--Tacoma--1950-1960; Mills--Tacoma; Logs; St. Regis Paper Co. (Tacoma)--1950-1960;

Men are adjusting the folding machines at St. Regis Paper Company's new bag plant while two women are stacking bags as they are ejected onto a conveyor belt. More rolls of paper stand at the back of the workroom ready to be moved onto the folding machines when they are needed. A crane hangs empty over them.

St. Regis Paper Co. (Tacoma)--1950-1960; Mills--Tacoma--1950-1960; Paper industry--Tacoma--1950-1960;

ca. 1959. The St. Regis Paper Co. kraft pulp and paper mill and multiwall bag plant at Tacoma, Washington. The plant was a major producing unit serving the western states. Late in 1959, construction was started to expand the pulp mill and install a second machine which would produce kraft paper and board, more than doubling the output of the mill. The new kraft paper and paper board machine was 130 feet wide and 630 feet long. It would require 150 additional employees at a payroll of 3/4 million dollars. Additions were being made to the steam and recovery plants, pulp mill (left) and to the paper mill (right.) (St. Regis Paper Co. Annual Report- 1959; TNT 11/5/1959, pg. 1)

Paper industry--Tacoma--1950-1960; Mills--Tacoma; Logs; St. Regis Paper Co. (Tacoma)--1950-1960;

This aerial view of St. Regis Paper Company's chip operations was taken in mid-September of 1964. A barge marked "Vancouver Tug" unloads tons of pulp-mill chips at the Tacoma kraft mill of St. Regis Paper. Two large mountains of chips are in storage outside side-by-side. Photograph ordered by Malcolm McGhie, industrial consultant, New York.

Aerial photographs; St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Barges--Canada--Vancouver;

St. Regis Paper Co. president and CEO William R. Adams stands next to enormous rolls of (kraft) paper on June 15, 1965, during a visit to the company's Tacoma plant. Adams, of New York, was in Tacoma along with Chrm. of the Board Roy Ferguson for dedication ceremonies commemorating the grand opening of the company's new $5,000,000 veneer plant and studmill. He would speak to 400 invited guests at a luncheon held at the plant site. Photograph ordered by St. Regis Paper Co., New York. (TNT 6-16-65, p. 1)

St. Regis Paper Co. (Tacoma)--1960-1970; Adams, William R.;

Informal portrait of St. Regis Paper Co. president and CEO, William R. Adams. Mr. Adams paid a visit to the company's Tacoma plant in mid-June, 1965. He stands with his arms crossed near rolls of (kraft) paper. He and Chairman of the Board Roy Ferguson were present for the dedication of St. Regis' new veneer plant and studmill. The new studmill had an annual capacity of 40 million board feet. The veneer plant used peeler logs for its plywood plants in Tacoma and Olympia. Photograph ordered by St. Regis Paper Co., New York. (TNT 6-16-65, p. 1)

St. Regis Paper Co. (Tacoma)--1960-1970; Adams, William R.;

ca. 1961. Customer print of aerial view of St. Regis Paper Co. plant and looming Mount Rainier, ca. 1961. By 1961, St. Regis was one of the most widely diversified manufacturers of paper and packaging. It had 111 mills, converting and manufacturing plants and was the only company with mills in all paper-making areas of the country. Tacoma had a new kraft paper and paperboard machine that went into production in 1961. The machine's rated capacity was 400 tons a day and it made a sheet over 20 feet wide. The kraft machine was a major element in a substantial program of expansion and modernization that had been going on in Tacoma for more than two years. (1961 St. Regis Annual Report)

St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Factories--Tacoma--1960-1970; Rainier, Mount (Wash.);

Chip feeder in operation at St. Regis Paper Co. May, 1961, photograph of one of the chip feeders on wheels employed at the St. Regis Paper Co. plant in Tacoma. Pounds of wood chips accumulate on wooden shelf. Photograph ordered by Improved Machinery, Inc.

St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Machinery;

Western Gear Corporation of Seattle installed new machinery at St. Regis Paper Co. Tacoma plant on October 13, 1961. View of machine with mountain of pulp-mill chips in background. The kraft mill stored outdoors piles of the chips, most of them purchased from local plywood and sawmills.

Machinery; Western Gear Corp. (Seattle); St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970;

The Samuel M. Langston Co. of Camden, N.J., made equipment for the corrugated container industry for over 100 years. View of Langston machinery at the St. Regis Paper Co. plant in September, 1961; machines may include the counter roll rewinder and/or shaftless rewind stand. Large roll of kraft paper on Langston machine. Northern Pacific boxcars conveniently located in rear of picture. Photograph ordered by the Samuel M. Langston Co.

Machinery; Paper industry--Tacoma--1960-1970; St. Regis Paper Co. (Tacoma)--1960-1970; Railroad freight cars--Tacoma;

ca. 1937. St. Regis Kraft Co.; filtering plant circa 1937. (WSHS)

St. Regis Paper Co. (Tacoma)--1930-1940; Mills--Tacoma--1930-1940; Paper industry--Tacoma--1930-1940;

1936 daily operations at St. Regis. View of a thick cluster of narrow steel or cement pipes at a St. Regis Paper Co. facility, probably the Tacoma location at 801 Portland Ave. in December of 1936. The St. Regis plant in Tacoma had undergone massive remodeling for several months to make it into a modern plant capable of producing 60,000 tons of bleached pulp per year. G37.1-026 (T.Times 10-14-36, p. 5-article; T. Times 11-25-36, p. 5-article)

St. Regis Paper Co. (Tacoma)--1930-1940; Paper industry--1930-1940; Lumber industry--1930-1940; Mills--Tacoma--1930-1940;

1936 daily operations at St. Regis. This is believed to be the St. Regis Paper Co. facility in Tacoma at 801 Portland Ave. as pictured in December of 1936. This exterior view of the plant shows its close proximity to railroad tracks which meant easier transport of its products. Pieces of lumber are strewn about and a wheelbarrow and other small carts are present. The Tacoma St. Regis Kraft Co. pulp plant had undergone modernization of its facility earlier in 1936 including new machinery and expansion of the plant. By the end of November, 1936, the plant was operating with a crew of 250. St. Regis expected that the bleaching unit would be ready in 90 days; until then, unbleached pulp as formerly produced would be manufactured. G37.1-021 (T.Times 10-14-36, p. 5-article; T. Times 11-25-36, p. 5-article)

St. Regis Paper Co. (Tacoma)--1930-1940; Paper industry--1930-1940; Lumber industry--1930-1940; Mills--Tacoma--1930-1940;

1936 daily operations at St. Regis. Interiors of the newly remodeled and expanded St. Regis Kraft Co. plant on the Tideflats were photographed on December 21-22, 1936. The company had spent a million dollars in the extensive remodeling project during 1936 which was nearly completed. This view appears to be of wood framed windows with two latches apiece. G37.1-014 (T.Times 10-14-36, p. 5; T. Times 11-25-36, p. 5-articles, no pictures, on both pages regarding remodeling)

St. Regis Paper Co. (Tacoma)--1930-1940; Paper industry--1930-1940; Lumber industry--1930-1940; Mills--Tacoma--1930-1940;